Chapter 72 : T2024—Iron and steel
PDF (616 KB) [help with PDF files]
Notes.
1. In this Chapter and, in the case of Notes (d), (e) and (f) throughout the Nomenclature, the following expressions have the meanings hereby assigned to them:
(a) Pig iron
Iron-carbon alloys not usefully malleable, containing more than 2% by weight of carbon and which may contain by weight one or more other elements within the following limits:
- not more than 10% of chromium
- not more than 6% of manganese
- not more than 3% of phosphorus
- not more than 8% of silicon
- a total of not more than 10% of other elements.
(b) Spiegeleisen
Iron-carbon alloys containing by weight more than 6% but not more than 30% of manganese and otherwise conforming to the specification at (a) above.
(c) Ferro-alloys
Alloys in pigs, blocks, lumps or similar primary forms, in forms obtained by continuous casting and also in granular or powder forms, whether or not agglomerated, commonly used as an additive in the manufacture of other alloys or as de-oxidants, de-sulphurizing agents or for similar uses in ferrous metallurgy and generally not usefully malleable, containing by weight 4% or more of the element iron and one or more of the following:
- more than 10% of chromium
- more than 30% of manganese
- more than 3% of phosphorus
- more than 8% of silicon
- a total of more than 10% of other elements, excluding carbon, subject to a maximum content of 10% in the case of copper.
(d) Steel
Ferrous materials other than those of heading 72.03 which (with the exception of certain types produced in the form of castings) are usefully malleable and which contain by weight 2% or less of carbon. However, chromium steels may contain higher proportions of carbon.
(e) Stainless steel
Alloy steels containing, by weight, 1.2% or less of carbon and 10.5% or more of chromium, with or without other elements.
(f) Other alloy steel
Steels not complying with the definition of stainless steel and containing by weight one or more of the following elements in the proportion shown:
- 0.3% or more of aluminum
- 0.0008% or more of boron
- 0.3% or more of chromium
- 0.3% or more of cobalt
- 0.4% or more of copper
- 0.4% or more of lead
- 1.65% or more of manganese
- 0.08% or more of molybdenum
- 0.3% or more of nickel
- 0.06% or more of niobium
- 0.6% or more of silicon
- 0.05% or more of titanium
- 0.3% or more of tungsten (wolfram)
- 0.1% or more of vanadium
- 0.05% or more of zirconium
- 0.1% or more of other elements (except sulphur, phosphorus, carbon and nitrogen), taken separately.
(g) Remelting scrap ingots of iron or steel
Products roughly cast in the form of ingots without feeder-heads or hot tops, or of pigs, having obvious surface faults and not complying with the chemical composition of pig iron, spiegeleisen or ferro-alloys.
(h) Granules
Products of which less than 90% by weight passes through a sieve with a mesh aperture of 1 mm and of which 90% or more by weight passes through a sieve with a mesh aperture of 5 mm.
(ij) Semi-finished products
Continuous cast products of solid section, whether or not subjected to primary hot-rolling; and
Other products of solid section, which have not been further worked than subjected to primary hot-rolling or roughly shaped by forging, including blanks for angles, shapes or sections.
These products are not presented in coils.
(k) Flat-rolled products
Rolled products of solid rectangular (other than square) cross-section, which do not conform to the definition at (ij) above in the form of:
- coils of successively superimposed layers, or
- straight lengths, which if of a thickness less than 4.75 mm are of a width measuring at least ten times the thickness or if of a thickness of 4.75 mm or more are of a width which exceeds 150 mm and measures at least twice the thickness.
Flat-rolled products include those with patterns in relief derived directly from rolling (for example, grooves, ribs, chequers, tears, buttons, lozenges) and those which have been perforated, corrugated or polished, provided that they do not thereby assume the character of articles or products of other headings.
Flat-rolled products of a shape other than rectangular or square, of any size, are to be classified as products of a width of 600 mm or more, provided that they do not assume the character of articles or products of other headings.
(l) Bars and rods, hot-rolled, in irregularly wound coils
Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).
(m) Other bars and rods
Products which do not conform to any of the definitions at (ij), (k) or (l) above or to the definition of wire, which have a uniform solid cross-section along their whole length in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). These products may:
- have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods);
- be twisted after rolling.
(n) Angles, shapes and sections
Products having a uniform solid cross-section along their whole length which do not conform to any of the definitions at (ij), (k), (l) or (m) above or to the definition of wire.
Chapter 72 does not include products of heading 73.01 or 73.02.
(o) Wire
Cold-formed products in coils, of any uniform solid cross-section along their whole length, which do not conform to the definition of flat-rolled products.
(p) Hollow drill bars and rods
Hollow bars and rods of any cross-section, suitable for drills, of which the greatest external dimension of the cross-section exceeds 15 mm but does not exceed 52 mm, and of which the greatest internal dimension does not exceed one half of the greatest external dimension. Hollow bars and rods of iron or steel not conforming to this definition are to be classified in heading 73.04.
2. Ferrous metals clad with another ferrous metal are to be classified as products of the ferrous metal predominating by weight.
3. Iron or steel products obtained by electrolytic deposition, by pressure casting or by sintering are to be classified, according to their form, their composition and their appearance, in the headings of this Chapter appropriate to similar hot-rolled products.
Subheading Notes.
1. In this Chapter the following expressions have the meanings hereby assigned to them:
(a) Alloy pig iron
Pig iron containing, by weight, one or more of the following elements in the specified proportions:
- more than 0.2% of chromium
- more than 0.3% of copper
- more than 0.3% of nickel
- more than 0.1% of any of the following elements: aluminum, molybdenum, titanium, tungsten (wolfram), vanadium.
(b) Non-alloy free-cutting steel
Non-alloy steel containing, by weight, one or more of the following elements in the specified proportions:
- 0.08% or more of sulphur
- 0.1% or more of lead
- more than 0.05% of selenium
- more than 0.01% of tellurium
- more than 0.05% of bismuth.
(c) Silicon-electrical steel
Alloy steels containing by weight at least 0.6% but not more than 6% of silicon and not more than 0.08% of carbon. They may also contain by weight not more than 1% of aluminum but no other element in a proportion that would give the steel the characteristics of another alloy steel.
(d) High speed steel
Alloy steels containing, with or without other elements, at least two of the three elements molybdenum, tungsten and vanadium with a combined content by weight of 7% or more, 0.6% or more of carbon and 3 to 6% of chromium.
(e) Silico-manganese steel
Alloy steels containing by weight:
- not more than 0.7% of carbon,
- 0.5% or more but not more than 1.9% of manganese, and
- 0.6% or more but not more than 2.3% of silicon, but no other element in a proportion that would give the steel the characteristics of another alloy steel.
2. For the classification of ferro-alloys in the subheadings of heading 72.02 the following rule should be observed:
A ferro-alloy is considered as binary and classified under the relevant subheading (if it exists) if only one of the alloy elements exceeds the minimum percentage laid down in Chapter Note 1 (c); by analogy, it is considered respectively as ternary or quaternary if two or three alloy elements exceed the minimum percentage.
For the application of this rule the unspecified "other elements" referred to in Chapter Note 1 (c) must each exceed 10% by weight.
Statistical Notes. (NB These notes do not form part of the Customs Tariff legislation.)
1. For the statistical purposes of subheadings 7222.11, 7222.19, 7222.20 and 7222.30, the expression "high nickel alloy steel" is considered to be nickel alloy steel containing by weight 24% or more of nickel.
2. . For the statistical purposes of this Chapter, the expression “tire cord-quality steel wire rod” is considered to be rod measuring 5.0 mm or more but not more than 6.0 mm in cross-sectional diameter, with an average partial decarburization of no more than 70 micrometers in depth (maximum 200 micrometers); having no non-deformable inclusions with a thickness (measured perpendicular to the rolling direction) greater than 20 micrometers; and, containing by weight the following elements in proportions:
- 0.68% or more carbon,
- less than 0.01% of aluminum,
- 0.04% or less, in aggregate, of phosphorus and sulfur,
- 0.008% or less of nitrogen, and
- not more than 0.55% in the aggregate, of copper, nickel and chromium.
3. For the statistical purposes of this Chapter, the expression “cold heading quality (CHQ)” is considered to be rod suitable for cold heading, forging, or thread rolling, and meeting standard ASTM F2282.
4. For the statistical purposes of this Chapter, the expression “welding quality wire rod” is considered to be rod measuring less than 10 mm in diameter having less than 0.2% carbon, less than 0.04% sulfur, and less than 0.04% phosphorus, suitable for drawing or rolling to final size for use as:
- an uncoated or plated or copper coated solid welding wire or rod;
- the core wire or core rod for covered shielded metal arc (“SMAW”) welding electrode, or
- the formed jacket of a flux cored welding electrode that is suitable for consumption in the electric arc welding process.
5. For the purposes of this Chapter, the term "concrete reinforcing bar", commonly known as rebar, means a steel bar produced with deformations.
Customs Tariff Schedule
| Tariff Item | SS | Description of Goods | Unit of Meas. | MFN Tariff | Applicable Preferential Tariffs |
|---|---|---|---|---|---|
| Tariff Item | SS | Description of Goods | Unit of Meas. | MFN Tariff | Applicable Preferential Tariffs |
| 72.01 | Pig iron and spiegeleisen in pigs, blocks or other primary forms. | ||||
| 7201.10.00 | 00 | Pig iron and spiegeleisen in pigs, blocks or other primary forms. - Non-alloy pig iron containing by weight 0.5% or less of phosphorus | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7201.20.00 | 00 | Pig iron and spiegeleisen in pigs, blocks or other primary forms. - Non-alloy pig iron containing by weight more than 0.5% of phosphorus | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7201.50.00 | 00 | Pig iron and spiegeleisen in pigs, blocks or other primary forms. - Alloy pig iron; spiegeleisen | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.02 | Ferro-alloys. | ||||
| 7202.11.00 | 00 | Ferro-alloys. - Ferro-manganese: - Containing by weight more than 2% of carbon | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7202.19.00 | 00 | Ferro-alloys. - Ferro-manganese: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7202.21.00 | 00 | Ferro-alloys. - Ferro-silicon: - Containing by weight more than 55% of silicon | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7202.29.00 | 00 | Ferro-alloys. - Ferro-silicon: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7202.30.00 | 00 | Ferro-alloys. - Ferro-silico-manganese | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7202.41.00 | 00 | Ferro-alloys. - Ferro-chromium: - Containing by weight more than 4% of carbonNote: The benefit of the Most-Favoured-Nation Tariff is extended to goods of this tariff item that originate in a country to which the General Tariff applies. | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7202.49.00 | 00 | Ferro-alloys. - Ferro-chromium: - OtherNote: The benefit of the Most-Favoured-Nation Tariff is extended to goods of this tariff item that originate in a country to which the General Tariff applies. | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7202.50.00 | 00 | Ferro-alloys. - Ferro-silico-chromium | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7202.60.00 | 00 | Ferro-alloys. - Ferro-nickel | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7202.70.00 | 00 | Ferro-alloys. - Ferro-molybdenum | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7202.80.00 | 00 | Ferro-alloys. - Ferro-tungsten and ferro-silico-tungsten | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7202.91.00 | 00 | Ferro-alloys. - Other: - Ferro-titanium and ferro-silico-titanium | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7202.92.00 | 00 | Ferro-alloys. - Other: - Ferro-vanadium | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7202.93.00 | 00 | Ferro-alloys. - Other: - Ferro-niobium | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7202.99.00 | 00 | Ferro-alloys. - Other: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.03 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms. | ||||
| 7203.10.00 | 00 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms. - Ferrous products obtained by direct reduction of iron ore | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7203.90.00 | 00 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms. - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.04 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. | ||||
| 7204.10.00 | 00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Waste and scrap of cast iron | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7204.21.00 | 00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Waste and scrap of alloy steel: - Of stainless steel | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7204.29.00 | 00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Waste and scrap of alloy steel: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7204.30.00 | 00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Waste and scrap of tinned iron or steel | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7204.41.00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7204.41.00 | 10 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles - No.1 in bundles | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7204.41.00 | 20 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles - Other turnings and shavings | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7204.41.00 | 90 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7204.49.00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7204.49.00 | 10 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Other - No. 1 heavy melting | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7204.49.00 | 20 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Other - No. 2 heavy melting | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7204.49.00 | 91 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Other - Other: - Shredded | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7204.49.00 | 99 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Other - Other: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7204.50.00 | 00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Remelting scrap ingots | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.05 | Granules and powders, of pig iron, spiegeleisen, iron or steel. | ||||
| 7205.10.00 | 00 | Granules and powders, of pig iron, spiegeleisen, iron or steel. - Granules | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7205.21.00 | 00 | Granules and powders, of pig iron, spiegeleisen, iron or steel. - Powders: - Of alloy steel | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7205.29.00 | 00 | Granules and powders, of pig iron, spiegeleisen, iron or steel. - Powders: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.06 | Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03). | ||||
| 7206.10.00 | 00 | Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03). - Ingots | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7206.90.00 | 00 | Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03). - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.07 | Semi-finished products of iron or non-alloy steel. | ||||
| 7207.11.00 | Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: - Of rectangular (including square) cross-section, the width measuring less than twice the thickness | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7207.11.00 | 10 | Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: - Of rectangular (including square) cross-section, the width measuring less than twice the thickness - Of iron | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7207.11.00 | 21 | Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: - Of rectangular (including square) cross-section, the width measuring less than twice the thickness - Of non-alloy steel: - Billets | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7207.11.00 | 29 | Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: - Of rectangular (including square) cross-section, the width measuring less than twice the thickness - Of non-alloy steel: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7207.12.00 | 00 | Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: - Other, of rectangular (other than square) cross-section | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7207.19.00 | Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7207.19.00 | 10 | Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: - Other - Rounds | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7207.19.00 | 90 | Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: - Other - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7207.20.00 | Semi-finished products of iron or non-alloy steel. - Containing by weight 0.25% or more of carbon | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7207.20.00 | 10 | Semi-finished products of iron or non-alloy steel. - Containing by weight 0.25% or more of carbon - Blooms | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7207.20.00 | 20 | Semi-finished products of iron or non-alloy steel. - Containing by weight 0.25% or more of carbon - Billets | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7207.20.00 | 30 | Semi-finished products of iron or non-alloy steel. - Containing by weight 0.25% or more of carbon - Slabs, sheet bars or rounds | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7207.20.00 | 90 | Semi-finished products of iron or non-alloy steel. - Containing by weight 0.25% or more of carbon - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.08 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. | ||||
| 7208.10.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - In coils, not further worked than hot-rolled, with patterns in relief | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.25.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled, pickled: - Of a thickness of 4.75 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.26.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled, pickled: - Of a thickness of 3 mm or more but less than 4.75 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.27.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled, pickled: - Of a thickness of less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.36.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.37.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7208.37.00 | 10 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width of 600 mm or more but not exceeding 1,525 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.37.00 | 20 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width exceeding 1,525 mm but not exceeding 1,830 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.37.00 | 50 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width exceeding 1,830 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.38.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 3 mm or more but less than 4.75 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7208.38.00 | 10 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 3 mm or more but less than 4.75 mm - Of a width of 600 mm or more but not exceeding 1,525 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.38.00 | 20 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 3 mm or more but less than 4.75 mm - Of a width exceeding 1,525 mm but not exceeding 1,830 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.38.00 | 50 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 3 mm or more but less than 4.75 mm - Of a width exceeding 1,830 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.39.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.40.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Not in coils, not further worked than hot-rolled, with patterns in relief | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7208.51.00 | 11 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Heat treated: - Pressure vessel quality, vacuum-degassed | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 12 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Heat treated: - Pressure vessel quality, not vacuum-degassed | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 19 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Heat treated: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 21 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 10 mm but not exceeding 15.875 mm: - Of a width less than 1,168.4 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 22 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 10 mm but not exceeding 15.875 mm: - Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 23 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 10 mm but not exceeding 15.875 mm: - Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 24 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 10 mm but not exceeding 15.875 mm: - Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 25 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 10 mm but not exceeding 15.875 mm: - Of a width exceeding 3,098.8 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 31 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 15.875 mm but not exceeding 25.4 mm: - Of a width less than 1,168.4 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 32 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 15.875 mm but not exceeding 25.4 mm: - Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 33 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 15.875 mm but not exceeding 25.4 mm: - Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 34 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 15.875 mm but not exceeding 25.4 mm: - Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 35 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 15.875 mm but not exceeding 25.4 mm: - Of a width exceeding 3,098.8 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 41 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 25.4 mm but not exceeding 50.8 mm: - Of a width less than 1,168.4 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 42 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 25.4 mm but not exceeding 50.8 mm: - Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 43 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 25.4 mm but not exceeding 50.8 mm: - Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 44 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 25.4 mm but not exceeding 50.8 mm: - Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 45 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 25.4 mm but not exceeding 50.8 mm: - Of a width exceeding 3,098.8 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 51 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 50.8 mm but not exceeding 76.2 mm: - Of a width less than 1,168.4 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 52 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 50.8 mm but not exceeding 76.2 mm: - Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 53 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 50.8 mm but not exceeding 76.2 mm: - Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 54 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 50.8 mm but not exceeding 76.2 mm: - Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 55 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 50.8 mm but not exceeding 76.2 mm: - Of a width exceeding 3,098.8 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 61 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 76.2 mm but not exceeding 101.6 mm: - Of a width less than 1,168.4 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 62 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 76.2 mm but not exceeding 101.6 mm: - Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 63 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 76.2 mm but not exceeding 101.6 mm: - Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 64 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 76.2 mm but not exceeding 101.6 mm: - Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 65 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 76.2 mm but not exceeding 101.6 mm: - Of a width exceeding 3,098.8 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 71 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness exceeding 101.6 mm: - Of a width less than 1,168.4 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 72 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness exceeding 101.6 mm: - Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 73 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness exceeding 101.6 mm: - Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 74 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness exceeding 101.6 mm: - Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.51.00 | 75 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness exceeding 101.6 mm: - Of a width exceeding 3,098.8 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.52.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7208.52.00 | 11 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Heat treated: - Pressure vessel quality, vacuum-degassed | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.52.00 | 12 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Heat treated: - Pressure vessel quality, not vacuum-degassed | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.52.00 | 19 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Heat treated: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.52.00 | 81 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Other: - Of a width less than 1,168.4 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.52.00 | 82 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Other: - Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.52.00 | 83 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Other: - Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.52.00 | 84 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Other: - Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.52.00 | 85 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Other: - Of a width exceeding 3,098.8 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.53.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Other, of a thickness of 3 mm or more but less than 4.75 mm | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.54.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Other, of a thickness of less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7208.90.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.09 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. | ||||
| 7209.15.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - In coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of 3 mm or more | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7209.16.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - In coils, not further worked than cold-rolled (cold-reduced): - Of a thickness exceeding 1 mm but less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7209.16.00 | 40 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - In coils, not further worked than cold-rolled (cold-reduced): - Of a thickness exceeding 1 mm but less than 3 mm - Annealed | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7209.16.00 | 90 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - In coils, not further worked than cold-rolled (cold-reduced): - Of a thickness exceeding 1 mm but less than 3 mm - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7209.17.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - In coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7209.17.00 | 40 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - In coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of 0.5 mm or more but not exceeding 1 mm - Annealed | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7209.17.00 | 90 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - In coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of 0.5 mm or more but not exceeding 1 mm - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7209.18.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - In coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of less than 0.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7209.25.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - Not in coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of 3 mm or more | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7209.26.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - Not in coils, not further worked than cold-rolled (cold-reduced): - Of a thickness exceeding 1 mm but less than 3 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7209.27.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - Not in coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7209.28.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - Not in coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of less than 0.5 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7209.90.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.10 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. | ||||
| 7210.11.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Plated or coated with tin: - Of a thickness of 0.5 mm or more | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.12.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Plated or coated with tin: - Of a thickness of less than 0.5 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.20.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Plated or coated with lead, including terne-plate | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.30.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Electrolytically plated or coated with zinc | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.41.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Corrugated | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.49.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7210.49.00 | 40 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness less than 0.25 mm | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.49.00 | 50 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness of 0.25 mm or more but less than 0.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.49.00 | 60 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.49.00 | 70 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness exceeding 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.50.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Plated or coated with chromium oxides or with chromium and chromium oxides | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.61.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Plated or coated with aluminum: - Plated or coated with aluminum-zinc alloys | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7210.61.00 | 10 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Plated or coated with aluminum: - Plated or coated with aluminum-zinc alloys - Of a thickness of less than 1.44 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.61.00 | 20 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Plated or coated with aluminum: - Plated or coated with aluminum-zinc alloys - Of a thickness of 1.44 mm or more | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.69.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Plated or coated with aluminum: - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7210.69.00 | 10 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Plated or coated with aluminum: - Other - Of a thickness of less than 1.44 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.69.00 | 20 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Plated or coated with aluminum: - Other - Of a thickness of 1.44 mm or more | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.70.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Painted, varnished or coated with plastics | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7210.70.00 | 10 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Painted, varnished or coated with plastics - Not plated or coated with metal and not clad | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.70.00 | 21 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Painted, varnished or coated with plastics - Plated or coated with zinc: - Electrolytically | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.70.00 | 29 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Painted, varnished or coated with plastics - Plated or coated with zinc: - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.70.00 | 90 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Painted, varnished or coated with plastics - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7210.90.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Other | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.11 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. | ||||
| 7211.13.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7211.14.00 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other, of a thickness of 4.75 mm or more | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7211.14.00 | 10 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other, of a thickness of 4.75 mm or more - Not in coils | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7211.14.00 | 90 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other, of a thickness of 4.75 mm or more - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7211.19.00 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7211.19.00 | 10 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other - Not in coils | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7211.19.00 | 90 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7211.23.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than cold-rolled (cold-reduced): - Containing by weight less than 0.25% of carbon | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7211.29.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than cold-rolled (cold-reduced): - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7211.90.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.12 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. | ||||
| 7212.10.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Plated or coated with tin | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7212.20.00 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Electrolytically plated or coated with zinc | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7212.20.00 | 10 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Electrolytically plated or coated with zinc - Of a thickness less than 0.25 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7212.20.00 | 20 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Electrolytically plated or coated with zinc - Of a thickness of 0.25 mm or more but less than 0.5 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7212.20.00 | 30 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Electrolytically plated or coated with zinc - Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7212.20.00 | 40 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Electrolytically plated or coated with zinc - Of a thickness exceeding 1 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7212.30.00 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Otherwise plated or coated with zinc | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7212.30.00 | 10 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Otherwise plated or coated with zinc - Of a thickness less than 0.25 mm | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7212.30.00 | 20 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Otherwise plated or coated with zinc - Of a thickness of 0.25 mm or more but less than 0.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7212.30.00 | 30 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Otherwise plated or coated with zinc - Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7212.30.00 | 40 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Otherwise plated or coated with zinc - Of a thickness exceeding 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7212.40.00 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Painted, varnished or coated with plastics | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7212.40.00 | 10 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Painted, varnished or coated with plastics - Not plated or coated with metal and not clad | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7212.40.00 | 21 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Painted, varnished or coated with plastics - Plated or coated with zinc: - Electrolytically | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7212.40.00 | 29 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Painted, varnished or coated with plastics - Plated or coated with zinc: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7212.40.00 | 90 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Painted, varnished or coated with plastics - Other | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7212.50.00 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Otherwise plated or coated | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7212.50.00 | 30 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Otherwise plated or coated - Of a thickness less than 0.25 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7212.50.00 | 40 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Otherwise plated or coated - Of a thickness of 0.25 mm or more but less than 0.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7212.50.00 | 50 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Otherwise plated or coated - Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7212.50.00 | 60 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Otherwise plated or coated - Of a thickness exceeding 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7212.60.00 | 00 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Clad | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.13 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. | ||||
| 7213.10.00 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Containing indentations, ribs, grooves or other deformations produced during the rolling process | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7213.10.00 | 11 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Containing indentations, ribs, grooves or other deformations produced during the rolling process - Concrete reinforcing bars, of specification CSA G30.18: - Of a diameter of 12 mm or less | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.10.00 | 12 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Containing indentations, ribs, grooves or other deformations produced during the rolling process - Concrete reinforcing bars, of specification CSA G30.18: - Of a diameter of more than 12 mm but not exceeding 17 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.10.00 | 13 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Containing indentations, ribs, grooves or other deformations produced during the rolling process - Concrete reinforcing bars, of specification CSA G30.18: - Of a diameter exceeding 17 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.10.00 | 90 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Containing indentations, ribs, grooves or other deformations produced during the rolling process - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.20.00 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other, of free-cutting steel | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7213.20.00 | 50 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other, of free-cutting steel - Containing by weight 0.1% or more of lead | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.20.00 | 90 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other, of free-cutting steel - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.91.00 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7213.91.00 | 41 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter - Not tempered or treated and not partly manufactured: - Tire cord-quality steel wire rod, as defined in Statistical Note 2 to this Chapter | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.91.00 | 42 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter - Not tempered or treated and not partly manufactured: - Of cold heading quality (CHQ) steel, as defined in Statistical Note 3 to this Chapter | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.91.00 | 43 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter - Not tempered or treated and not partly manufactured: - Of welding quality wire rods, as defined in Statistical Note 4 to this Chapter | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.91.00 | 49 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter - Not tempered or treated and not partly manufactured: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.91.00 | 50 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter - Other, containing by weight less than 0.25% of carbon | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.91.00 | 60 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter - Other, containing by weight 0.25% or more but less than 0.6% of carbon | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.91.00 | 70 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter - Other, containing by weight 0.6% or more of carbon | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.99.00 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7213.99.00 | 11 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Other - Of circular cross-section, containing by weight less than 0.25% of carbon: - Of a diameter of 14 mm or more but less than 19 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.99.00 | 12 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Other - Of circular cross-section, containing by weight less than 0.25% of carbon: - Of a diameter of 19 mm or more but not exceeding 25.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.99.00 | 13 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Other - Of circular cross-section, containing by weight less than 0.25% of carbon: - Of a diameter exceeding 25.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.99.00 | 31 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Other - Of circular cross-section, containing by weight 0.25% or more but less than 0.6% of carbon: - Of a diameter of 14 mm or more but less than 19 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.99.00 | 32 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Other - Of circular cross-section, containing by weight 0.25% or more but less than 0.6% of carbon: - Of a diameter of 19 mm or more but not exceeding 25.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.99.00 | 33 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Other - Of circular cross-section, containing by weight 0.25% or more but less than 0.6% of carbon: - Of a diameter exceeding 25.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.99.00 | 51 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Other - Of circular cross-section, containing by weight 0.6% or more of carbon: - Of a diameter of 14 mm or more but less than 19 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.99.00 | 52 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Other - Of circular cross-section, containing by weight 0.6% or more of carbon: - Of a diameter of 19 mm or more but not exceeding 25.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.99.00 | 53 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Other - Of circular cross-section, containing by weight 0.6% or more of carbon: - Of a diameter exceeding 25.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7213.99.00 | 90 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Other - Other, containing by weight 0.6% or more of carbon: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.14 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. | ||||
| 7214.10.00 | 00 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Forged | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.20.00 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7214.20.00 | 11 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: - With a maximum yield point of 400MPa | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.20.00 | 12 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: - With a minimum yield point greater than 400MPa but not exceeding 500MPa | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.20.00 | 13 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: - With a minimum yield point greater than 500MPa but not exceeding 600MPa | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.20.00 | 14 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: - With a minimum yield point greater than 600MPa | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.20.00 | 21 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: - With a maximum yield point of 400MPa | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.20.00 | 22 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: - With a minimum yield point greater than 400MPa but not exceeding 500MPa | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.20.00 | 23 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: - With a minimum yield point greater than 500MPa but not exceeding 600MPa | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.20.00 | 24 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: - With a minimum yield point greater than 600MPa | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.20.00 | 31 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: - With a maximum yield point of 400MPa | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.20.00 | 32 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: - With a minimum yield point greater than 400MPa but not exceeding 500MPa | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.20.00 | 33 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: - With a minimum yield point greater than 500MPa but not exceeding 600MPa | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.20.00 | 34 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: - With a minimum yield point greater than 600MPa | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.20.00 | 90 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.30.00 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7214.30.00 | 10 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Containing by weight 0.15% or more but not exceeding 0.35% of lead or 0.05% or more but not exceeding 0.4% of bismuth, for use in Canadian manufactures | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.30.00 | 24 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Flat bars, including flat grader blade sections: - Of a width not exceeding 76 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.30.00 | 25 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Flat bars, including flat grader blade sections: - Of a width exceeding 76 mm but less than 152 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.30.00 | 26 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Flat bars, including flat grader blade sections: - Of a width of 152 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.30.00 | 33 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Rounds: - Of a diameter not exceeding 76 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.30.00 | 34 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Rounds: - Of a diameter exceeding 76 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.30.00 | 40 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Hexagons | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.30.00 | 50 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Squares | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.30.00 | 90 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.91.00 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7214.91.00 | 11 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: - Of a width not exceeding 76 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.91.00 | 12 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: - Of a width exceeding 76 mm but less than 152 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.91.00 | 13 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: - Of a width of 152 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.91.00 | 21 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: - Of a width not exceeding 76 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.91.00 | 22 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: - Of a width exceeding 76 mm but less than 152 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.91.00 | 23 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: - Of a width of 152 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.91.00 | 31 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon: - Of a width not exceeding 76 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.91.00 | 32 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon: - Of a width exceeding 76 mm but less than 152 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.91.00 | 33 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon: - Of a width of 152 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.99.00 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7214.99.00 | 20 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Hexagons | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.99.00 | 30 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Squares | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.99.00 | 41 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight less than 0.25% of carbon: - Rounds, of a diameter of less than 76 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.99.00 | 42 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight less than 0.25% of carbon: - Rounds, of a diameter of 76 mm or more but not exceeding 152 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.99.00 | 43 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight less than 0.25% of carbon: - Rounds, of a diameter exceeding 152 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.99.00 | 49 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight less than 0.25% of carbon: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.99.00 | 51 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight 0.25% or more but less than 0.6% of carbon: - Rounds, of a diameter of less than 76 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.99.00 | 52 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight 0.25% or more but less than 0.6% of carbon: - Rounds, of a diameter of 76 mm or more but not exceeding 152 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.99.00 | 53 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight 0.25% or more but less than 0.6% of carbon: - Rounds, of a diameter exceeding 152 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.99.00 | 59 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight 0.25% or more but less than 0.6% of carbon: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7214.99.00 | 60 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight 0.6% or more of carbon | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.15 | Other bars and rods of iron or non-alloy steel. | ||||
| 7215.10.00 | Other bars and rods of iron or non-alloy steel. - Of free-cutting steel, not further worked than cold-formed or cold-finished | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7215.10.00 | 20 | Other bars and rods of iron or non-alloy steel. - Of free-cutting steel, not further worked than cold-formed or cold-finished - Rounds | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7215.10.00 | 90 | Other bars and rods of iron or non-alloy steel. - Of free-cutting steel, not further worked than cold-formed or cold-finished - Other | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7215.50.00 | Other bars and rods of iron or non-alloy steel. - Other, not further worked than cold-formed or cold-finished | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7215.50.00 | 10 | Other bars and rods of iron or non-alloy steel. - Other, not further worked than cold-formed or cold-finished - Flat bars | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7215.50.00 | 21 | Other bars and rods of iron or non-alloy steel. - Other, not further worked than cold-formed or cold-finished - Rounds: - Ground, turned or polished | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7215.50.00 | 29 | Other bars and rods of iron or non-alloy steel. - Other, not further worked than cold-formed or cold-finished - Rounds: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7215.50.00 | 90 | Other bars and rods of iron or non-alloy steel. - Other, not further worked than cold-formed or cold-finished - Other | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7215.90.00 | Other bars and rods of iron or non-alloy steel. - Other | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7215.90.00 | 10 | Other bars and rods of iron or non-alloy steel. - Other - Chrome plated | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7215.90.00 | 20 | Other bars and rods of iron or non-alloy steel. - Other - Corrosion resistant concrete reinforcing bars | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7215.90.00 | 30 | Other bars and rods of iron or non-alloy steel. - Other - Other concrete reinforcing bars | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7215.90.00 | 90 | Other bars and rods of iron or non-alloy steel. - Other - Other | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.16 | Angles, shapes and sections of iron or non-alloy steel. | ||||
| 7216.10.00 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7216.10.00 | 11 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm - U sections: - American standard | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.10.00 | 19 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm - U sections: - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.10.00 | 21 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm - I sections: - American standard | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.10.00 | 29 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm - I sections: - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.10.00 | 30 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm - H sections | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.21.00 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: - L sections | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7216.21.00 | 10 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: - L sections - Equal legs | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.21.00 | 20 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: - L sections - Unequal legs | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.22.00 | 00 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: - T sections | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.31.00 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7216.31.00 | 11 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height of 80 mm or more but not exceeding 152.4 mm: - American standard | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.31.00 | 12 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height of 80 mm or more but not exceeding 152.4 mm: - For motor vehicles | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.31.00 | 19 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height of 80 mm or more but not exceeding 152.4 mm: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.31.00 | 21 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height exceeding 152.4 mm: - American standard | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.31.00 | 22 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height exceeding 152.4 mm: - For motor vehicles | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.31.00 | 29 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height exceeding 152.4 mm: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.32.00 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - I sections | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7216.32.00 | 10 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - I sections - Of a height of 80 mm or more but not exceeding 152.4 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.32.00 | 20 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - I sections - Of a height exceeding 152.4 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.33.00 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7216.33.00 | 11 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height not exceeding 150 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.33.00 | 12 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height exceeding 150 mm but not exceeding 355 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.33.00 | 13 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height exceeding 355 mm but not exceeding 635 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.33.00 | 14 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height exceeding 635 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.33.00 | 20 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Bearing pile | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.33.00 | 91 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Other: - Of a height of 80 mm or more but not exceeding 152.4 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.33.00 | 92 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Other: - Of a height exceeding 152.4 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.40.00 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7216.40.00 | 11 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, equal legs: - Of a height of 80 mm or more but not exceeding 152.4 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.40.00 | 12 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, equal legs: - Of a height exceeding 152.4 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.40.00 | 21 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, unequal legs: - Large leg, of a height of 80 mm or more but not exceeding 152.4 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.40.00 | 22 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, unequal legs: - Large leg, of a height exceeding 152.4 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.40.00 | 30 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - T sections | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.50.00 | Angles, shapes and sections of iron or non-alloy steel. - Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7216.50.00 | 10 | Angles, shapes and sections of iron or non-alloy steel. - Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded - For use in ships, boats or floating structures | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.50.00 | 20 | Angles, shapes and sections of iron or non-alloy steel. - Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded - Shapes or sections, with bevelled edge or edges, of a length of more than 3.65 m and either of a width of more than 25.4 cm or of a thickness of more than 3.5 cm, for use in the manufacture of cutting edges for bulldozer or angledozer blades, front-end shovel loader buckets, combination excavating and transporting scrapers, road graders or road scrapers | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.50.00 | 30 | Angles, shapes and sections of iron or non-alloy steel. - Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded - Track shoe profile bars of steel, of a width of 190 mm or more but not exceeding 350 mm and of a height not exceeding 150 mm, for use in the manufacture of track shoes for track-laying machinery or vehicles | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.50.00 | 90 | Angles, shapes and sections of iron or non-alloy steel. - Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.61.00 | 00 | Angles, shapes and sections of iron or non-alloy steel. - Angles, shapes and sections, not further worked than cold-formed or cold-finished: - Obtained from flat-rolled products | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.69.00 | 00 | Angles, shapes and sections of iron or non-alloy steel. - Angles, shapes and sections, not further worked than cold-formed or cold-finished: - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.91.00 | Angles, shapes and sections of iron or non-alloy steel. - Other: - Cold-formed or cold-finished from flat-rolled products | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7216.91.00 | 10 | Angles, shapes and sections of iron or non-alloy steel. - Other: - Cold-formed or cold-finished from flat-rolled products - L sections | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.91.00 | 20 | Angles, shapes and sections of iron or non-alloy steel. - Other: - Cold-formed or cold-finished from flat-rolled products - I or H sections | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.91.00 | 30 | Angles, shapes and sections of iron or non-alloy steel. - Other: - Cold-formed or cold-finished from flat-rolled products - U sections | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.91.00 | 91 | Angles, shapes and sections of iron or non-alloy steel. - Other: - Cold-formed or cold-finished from flat-rolled products - Other: - Ribbed shapes | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.91.00 | 99 | Angles, shapes and sections of iron or non-alloy steel. - Other: - Cold-formed or cold-finished from flat-rolled products - Other: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.99.00 | Angles, shapes and sections of iron or non-alloy steel. - Other: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7216.99.00 | 10 | Angles, shapes and sections of iron or non-alloy steel. - Other: - Other - L sections | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.99.00 | 20 | Angles, shapes and sections of iron or non-alloy steel. - Other: - Other - I or H sections | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.99.00 | 30 | Angles, shapes and sections of iron or non-alloy steel. - Other: - Other - U sections | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.99.00 | 91 | Angles, shapes and sections of iron or non-alloy steel. - Other: - Other - Other: - Ribbed shapes | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7216.99.00 | 99 | Angles, shapes and sections of iron or non-alloy steel. - Other: - Other - Other: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.17 | Wire of iron or non-alloy steel. | ||||
| 7217.10.00 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7217.10.00 | 41 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Round, heat treated, containing by weight less than 0.25% of carbon: - Of a diameter of less than 1.5 mm, in coils weighing not more than 2 kg | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 42 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Round, heat treated, containing by weight less than 0.25% of carbon: - Other, of a diameter of less than 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 43 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Round, heat treated, containing by weight less than 0.25% of carbon: - Other, of a diameter of 1 mm or more but less than 1.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 44 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Round, heat treated, containing by weight less than 0.25% of carbon: - Other, of a diameter of 1.5 mm or more but less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 45 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Round, heat treated, containing by weight less than 0.25% of carbon: - Other, of a diameter of 3 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 51 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other, containing by weight less than 0.25% of carbon: - Round, of a diameter of less than 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 52 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other, containing by weight less than 0.25% of carbon: - Round, of a diameter of 1 mm or more but less than 1.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 53 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other, containing by weight less than 0.25% of carbon: - Round, of a diameter of 1.5 mm or more but less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 54 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other, containing by weight less than 0.25% of carbon: - Round, of a diameter of 3 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 55 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other, containing by weight less than 0.25% of carbon: - Flat | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 59 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other, containing by weight less than 0.25% of carbon: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 61 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other round, containing by weight 0.25% or more but less than 0.6% of carbon: - Heat treated, of a diameter of less than 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 62 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other round, containing by weight 0.25% or more but less than 0.6% of carbon: - Heat treated, of a diameter of 1 mm or more but less than 1.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 63 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other round, containing by weight 0.25% or more but less than 0.6% of carbon: - Heat treated, of a diameter of 1.5 mm or more but less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 64 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other round, containing by weight 0.25% or more but less than 0.6% of carbon: - Heat treated, of a diameter of 3 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 65 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other round, containing by weight 0.25% or more but less than 0.6% of carbon: - Other, of a diameter of less than 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 66 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other round, containing by weight 0.25% or more but less than 0.6% of carbon: - Other, of a diameter of 1 mm or more but less than 1.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 67 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other round, containing by weight 0.25% or more but less than 0.6% of carbon: - Other, of a diameter of 1.5 mm or more but less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 68 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other round, containing by weight 0.25% or more but less than 0.6% of carbon: - Other, of a diameter of 3 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 71 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other, containing by weight 0.25% or more but less than 0.6% of carbon: - Flat | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 79 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other, containing by weight 0.25% or more but less than 0.6% of carbon: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 81 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other round, containing by weight 0.6% or more of carbon: - Heat treated, of a diameter of less than 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 82 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other round, containing by weight 0.6% or more of carbon: - Heat treated, of a diameter of 1 mm or more but less than 1.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 83 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other round, containing by weight 0.6% or more of carbon: - Heat treated, of a diameter of 1.5 mm or more but less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 84 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other round, containing by weight 0.6% or more of carbon: - Heat treated, of a diameter of 3 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 85 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other round, containing by weight 0.6% or more of carbon: - Other, of a diameter of less than 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 86 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other round, containing by weight 0.6% or more of carbon: - Other, of a diameter of 1 mm or more but less than 1.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 87 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other round, containing by weight 0.6% or more of carbon: - Other, of a diameter of 1.5 mm or more but less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 88 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other round, containing by weight 0.6% or more of carbon: - Other, of a diameter of 3 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 91 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other, containing by weight 0.6% or more of carbon: - Flat | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.10.00 | 99 | Wire of iron or non-alloy steel. - Not plated or coated, whether or not polished - Other, containing by weight 0.6% or more of carbon: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | Wire of iron or non-alloy steel. - Plated or coated with zinc | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7217.20.00 | 10 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Containing by weight less than 0.25% of carbon: - Flat | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 41 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Plated or coated wth zinc-aluminum, containing by weight less than 0.25% of carbon: - Round, of a diameter of less than 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 42 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Plated or coated wth zinc-aluminum, containing by weight less than 0.25% of carbon: - Round, of a diameter of 1 mm or more but less than 1.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 43 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Plated or coated wth zinc-aluminum, containing by weight less than 0.25% of carbon: - Round, of a diameter of 1.5 mm or more but less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 44 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Plated or coated wth zinc-aluminum, containing by weight less than 0.25% of carbon: - Round, of a diameter of 3 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 49 | Wire of iron or non-alloy steel. - Plated or coated with zinc Plated or coated wth zinc-aluminum, containing by weight less than 0.25% of carbon: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 51 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Plated or coated with zinc-aluminum, containing by weight 0.25% or more but less than 0.6% of carbon: - Round, of a diameter of less than 1 mm | - | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 52 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Plated or coated with zinc-aluminum, containing by weight 0.25% or more but less than 0.6% of carbon: - Round, of a diameter of 1 mm or more but less than 1.5 mm | - | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 53 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Plated or coated with zinc-aluminum, containing by weight 0.25% or more but less than 0.6% of carbon: - Round, of a diameter of 1.5 mm or more but less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 54 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Plated or coated with zinc-aluminum, containing by weight 0.25% or more but less than 0.6% of carbon: - Round, of a diameter of 3 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 59 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Plated or coated with zinc-aluminum, containing by weight 0.25% or more but less than 0.6% of carbon: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 61 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Plated or coated with zinc-aluminum, containing by weight 0.6% or more of carbon: - Round, of a diameter of less than 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 62 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Plated or coated with zinc-aluminum, containing by weight 0.6% or more of carbon: - Round, of a diameter of 1 mm or more but less than 1.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 63 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Plated or coated with zinc-aluminum, containing by weight 0.6% or more of carbon: - Round, of a diameter of 1.5 mm or more but less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 64 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Plated or coated with zinc-aluminum, containing by weight 0.6% or more of carbon: - Round, of a diameter of 3 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 69 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Plated or coated with zinc-aluminum, containing by weight 0.6% or more of carbon: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 71 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Other, containing by weight less than 0.25% of carbon: - Round, of a diameter of less than 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 72 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Other, containing by weight less than 0.25% of carbon: - Round, of a diameter of 1 mm or more but less than 1.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 73 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Other, containing by weight less than 0.25% of carbon: - Round, of a diameter of 1.5 mm or more but less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 74 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Other, containing by weight less than 0.25% of carbon: - Round, of a diameter of 3 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 79 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Other, containing by weight less than 0.25% of carbon: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 81 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Other, containing by weight 0.25% or more but less than 0.6% of carbon: - Round, of a diameter of less than 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 82 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Other, containing by weight 0.25% or more but less than 0.6% of carbon: - Round, of a diameter of 1 mm or more but less than 1.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 83 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Other, containing by weight 0.25% or more but less than 0.6% of carbon: - Round, of a diameter of 1.5 mm or more but less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 84 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Other, containing by weight 0.25% or more but less than 0.6% of carbon: - Round, of a diameter of 3 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 89 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Other, containing by weight 0.25% or more but less than 0.6% of carbon: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 91 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Other, containing by weight 0.6% or more of carbon: - Round, of a diameter of less than 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 92 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Other, containing by weight 0.6% or more of carbon: - Round, of a diameter of 1 mm or more but less than 1.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 93 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Other, containing by weight 0.6% or more of carbon: - Round, of a diameter of 1.5 mm or more but less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 94 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Other, containing by weight 0.6% or more of carbon: - Round, of a diameter of 3 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.20.00 | 99 | Wire of iron or non-alloy steel. - Plated or coated with zinc - Other, containing by weight 0.6% or more of carbon: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.30.00 | Wire of iron or non-alloy steel. - Plated or coated with other base metals | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7217.30.00 | 10 | Wire of iron or non-alloy steel. - Plated or coated with other base metals - Containing by weight 0.6% or more of carbon: - Flat | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.30.00 | 21 | Wire of iron or non-alloy steel. - Plated or coated with other base metals - Other, containing by weight less than 0.25% of carbon: - Round, of a diameter of less than 1 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.30.00 | 22 | Wire of iron or non-alloy steel. - Plated or coated with other base metals - Other, containing by weight less than 0.25% of carbon: - Round, of a diameter of 1 mm or more but less than 1.5 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.30.00 | 23 | Wire of iron or non-alloy steel. - Plated or coated with other base metals - Other, containing by weight less than 0.25% of carbon: - Round, of a diameter of 1.5 mm or more but less than 3 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.30.00 | 24 | Wire of iron or non-alloy steel. - Plated or coated with other base metals - Other, containing by weight less than 0.25% of carbon: - Round, of a diameter of 3 mm or more | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.30.00 | 29 | Wire of iron or non-alloy steel. - Plated or coated with other base metals - Other, containing by weight less than 0.25% of carbon: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.30.00 | 31 | Wire of iron or non-alloy steel. - Plated or coated with other base metals - Other, containing by weight 0.25% or more but less than 0.6% of carbon: - Round, of a diameter of less than 1 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.30.00 | 32 | Wire of iron or non-alloy steel. - Plated or coated with other base metals - Other, containing by weight 0.25% or more but less than 0.6% of carbon: - Round, of a diameter of 1 mm or more but less than 1.5 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.30.00 | 33 | Wire of iron or non-alloy steel. - Plated or coated with other base metals - Other, containing by weight 0.25% or more but less than 0.6% of carbon: - Round, of a diameter of 1.5 mm or more but less than 3 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.30.00 | 34 | Wire of iron or non-alloy steel. - Plated or coated with other base metals - Other, containing by weight 0.25% or more but less than 0.6% of carbon: - Round, of a diameter of 3 mm or more | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.30.00 | 39 | Wire of iron or non-alloy steel. - Plated or coated with other base metals - Other, containing by weight 0.25% or more but less than 0.6% of carbon: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.30.00 | 41 | Wire of iron or non-alloy steel. - Plated or coated with other base metals - Other, containing by weight 0.6% or more of carbon: - Round, of a diameter of less than 1 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.30.00 | 42 | Wire of iron or non-alloy steel. - Plated or coated with other base metals - Other, containing by weight 0.6% or more of carbon: - Round, of a diameter of 1 mm or more but less than 1.5 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.30.00 | 43 | Wire of iron or non-alloy steel. - Plated or coated with other base metals - Other, containing by weight 0.6% or more of carbon: - Round, of a diameter of 1.5 mm or more but less than 3 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.30.00 | 44 | Wire of iron or non-alloy steel. - Plated or coated with other base metals - Other, containing by weight 0.6% or more of carbon: - Round, of a diameter of 3 mm or more | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.30.00 | 49 | Wire of iron or non-alloy steel. - Plated or coated with other base metals - Other, containing by weight 0.6% or more of carbon: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.90.00 | Wire of iron or non-alloy steel. - Other | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7217.90.00 | 20 | Wire of iron or non-alloy steel. - Other - Coated with plastics | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.90.00 | 91 | Wire of iron or non-alloy steel. - Other - Other: - Containing by weight less than 0.25% of carbon | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.90.00 | 92 | Wire of iron or non-alloy steel. - Other - Other: - Containing by weight 0.25% or more but less than 0.6% of carbon | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7217.90.00 | 93 | Wire of iron or non-alloy steel. - Other - Other: - Containing by weight 0.6% or more of carbon | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.18 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel. | ||||
| 7218.10.00 | 00 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel. - Ingots and other primary forms | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7218.91.00 | 00 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel. - Other: - Of rectangular (other than square) cross-section | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7218.99.00 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel. - Other: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7218.99.00 | 10 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel. - Other: - Other - Blooms, billets, rounds, slabs and sheet bars | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7218.99.00 | 90 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel. - Other: - Other - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.19 | Flat-rolled products of stainless steel, of a width of 600 mm or more. | ||||
| 7219.11.00 | 00 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than hot-rolled, in coils: - Of a thickness exceeding 10 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.12.00 | 00 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than hot-rolled, in coils: - Of a thickness of 4.75 mm or more but not exceeding 10 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.13.00 | 00 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than hot-rolled, in coils: - Of a thickness of 3 mm or more but less than 4.75 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.14.00 | 00 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than hot-rolled, in coils: - Of a thickness of less than 3 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.21.00 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than hot-rolled, not in coils: - Of a thickness exceeding 10 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7219.21.00 | 10 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than hot-rolled, not in coils: - Of a thickness exceeding 10 mm - Of a width of 600 mm or more but not exceeding 1,830 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.21.00 | 20 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than hot-rolled, not in coils: - Of a thickness exceeding 10 mm - Of a width exceeding 1,830 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.22.00 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than hot-rolled, not in coils: - Of a thickness of 4.75 mm or more but not exceeding 10 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7219.22.00 | 10 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than hot-rolled, not in coils: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width of 600 mm or more but not exceeding 1,830 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.22.00 | 20 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than hot-rolled, not in coils: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width exceeding 1,830 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.23.00 | 00 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than hot-rolled, not in coils: - Of a thickness of 3 mm or more but less than 4.75 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.24.00 | 00 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than hot-rolled, not in coils: - Of a thickness of less than 3 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.31.00 | 00 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than cold-rolled (cold-reduced): - Of a thickness of 4.75 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.32.00 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than cold-rolled (cold-reduced): - Of a thickness of 3 mm or more but less than 4.75 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7219.32.00 | 10 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than cold-rolled (cold-reduced): - Of a thickness of 3 mm or more but less than 4.75 mm - Of a width of 600 mm or more but not exceeding 1,250 mm: - 300 Series | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.32.00 | 90 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than cold-rolled (cold-reduced): - Of a thickness of 3 mm or more but less than 4.75 mm - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.33.00 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than cold-rolled (cold-reduced): - Of a thickness exceeding 1 mm but less than 3 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7219.33.00 | 10 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than cold-rolled (cold-reduced): - Of a thickness exceeding 1 mm but less than 3 mm - Of a width of 600 mm or more but not exceeding 1,250 mm: - 300 Series | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.33.00 | 90 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than cold-rolled (cold-reduced): - Of a thickness exceeding 1 mm but less than 3 mm - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.34.00 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than cold-rolled (cold-reduced): - Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7219.34.00 | 10 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than cold-rolled (cold-reduced): - Of a thickness of 0.5 mm or more but not exceeding 1 mm - Of a width of 600 mm or more but not exceeding 1,250 mm: - 300 Series | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.34.00 | 90 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than cold-rolled (cold-reduced): - Of a thickness of 0.5 mm or more but not exceeding 1 mm - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.35.00 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than cold-rolled (cold-reduced): - Of a thickness of less than 0.5 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7219.35.00 | 10 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than cold-rolled (cold-reduced): - Of a thickness of less than 0.5 mm - Of a width of 600 mm or more but not exceeding 1,250 mm: - 300 Series | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.35.00 | 90 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than cold-rolled (cold-reduced): - Of a thickness of less than 0.5 mm - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7219.90.00 | 00 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.20 | Flat-rolled products of stainless steel, of a width of less than 600 mm. | ||||
| 7220.11.00 | 00 | Flat-rolled products of stainless steel, of a width of less than 600 mm. - Not further worked than hot-rolled: - Of a thickness of 4.75 mm or more | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7220.12.00 | 00 | Flat-rolled products of stainless steel, of a width of less than 600 mm. - Not further worked than hot-rolled: - Of a thickness of less than 4.75 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7220.20.00 | Flat-rolled products of stainless steel, of a width of less than 600 mm. - Not further worked than cold-rolled (cold-reduced) | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7220.20.00 | 10 | Flat-rolled products of stainless steel, of a width of less than 600 mm. - Not further worked than cold-rolled (cold-reduced) - Of a thickness not exceeding 4.75 mm: - 300 Series | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7220.20.00 | 90 | Flat-rolled products of stainless steel, of a width of less than 600 mm. - Not further worked than cold-rolled (cold-reduced) - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7220.90.00 | 00 | Flat-rolled products of stainless steel, of a width of less than 600 mm. - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7221.00.00 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel. | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7221.00.00 | 30 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel. - Containing indentations, ribs, grooves or other deformations produced during the rolling process | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7221.00.00 | 40 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel. - Rounds, 300 series | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7221.00.00 | 50 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel. - Other rounds | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7221.00.00 | 60 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel. - Other wire rods | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7221.00.00 | 90 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel. - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.22 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. | ||||
| 7222.11.00 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: - Of circular cross-section | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7222.11.00 | 10 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: - Of circular cross-section - High nickel alloy steel: - Containing indentations, ribs, grooves or other deformations produced during the rolling process | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.11.00 | 31 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: - Of circular cross-section - Other, of high nickel alloy steel: - Of a diameter of 25 mm or more | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.11.00 | 32 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: - Of circular cross-section - Other, of high nickel alloy steel: - Of a diameter of less than 25 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.11.00 | 91 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: - Of circular cross-section - Other: - Of a diameter of 25 mm or more | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.11.00 | 92 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: - Of circular cross-section - Other: - Of a diameter of less than 25 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.19.00 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7222.19.00 | 11 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: - Other - High nickel alloy steel: - Flat bars | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.19.00 | 19 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: - Other - High nickel alloy steel: - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.19.00 | 21 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: - Other - Other: - Flat bars | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.19.00 | 29 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: - Other - Other: - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.20.00 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than cold-formed or cold-finished | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7222.20.00 | 20 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than cold-formed or cold-finished - Containing indentations, ribs, grooves or other deformations produced during the rolling process | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.20.00 | 31 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than cold-formed or cold-finished - Other, of high nickel alloy steel: - Rounds, of a diameter of 25 mm or more | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.20.00 | 32 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than cold-formed or cold-finished - Other, of high nickel alloy steel: - Rounds, of a diameter of less than 25 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.20.00 | 39 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than cold-formed or cold-finished - Other, of high nickel alloy steel: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.20.00 | 91 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than cold-formed or cold-finished - Other: - Rounds, of a diameter of 25 mm or more | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.20.00 | 92 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than cold-formed or cold-finished - Other: - Rounds, of a diameter of less than 25 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.20.00 | 93 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than cold-formed or cold-finished - Other: - Flat bars | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.20.00 | 99 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Bars and rods, not further worked than cold-formed or cold-finished - Other: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.30.00 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Other bars and rods | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7222.30.00 | 20 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Other bars and rods - Other, forged: - Containing indentations, ribs, grooves or other deformations produced during the rolling process | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.30.00 | 30 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Other bars and rods - Other, of high nickel alloy steel | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.30.00 | 90 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Other bars and rods - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.40.00 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Angles, shapes and sections | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7222.40.00 | 10 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Angles, shapes and sections - Not further worked than hot-rolled or cold-rolled: - Profile wire, cold drawn or cold drawn and annealed, up to 0.787 mm² in maximum solid cross-sectional area | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.40.00 | 20 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Angles, shapes and sections - Other wire | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7222.40.00 | 90 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Angles, shapes and sections - Other: - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7223.00.00 | Wire of stainless steel. | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7223.00.00 | 30 | Wire of stainless steel. - Profile wire, cold drawn or cold drawn and annealed, up to 0.787 mm² in maximum solid cross-sectional area | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7223.00.00 | 41 | Wire of stainless steel. - Other, coated or covered: - Round spring | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7223.00.00 | 42 | Wire of stainless steel. - Other, coated or covered: - Other round | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7223.00.00 | 49 | Wire of stainless steel. - Other, coated or covered: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7223.00.00 | 51 | Wire of stainless steel. - Other round: - Spring | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7223.00.00 | 52 | Wire of stainless steel. - Other round: - Other, of a diameter of less than 0.25 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7223.00.00 | 53 | Wire of stainless steel. - Other round: - Other, of a diameter of 0.25 mm or more but less than 0.76 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7223.00.00 | 54 | Wire of stainless steel. - Other round: - Other, of a diameter of 0.76 mm or more but less than 1.52 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7223.00.00 | 55 | Wire of stainless steel. - Other round: - Other, of a diameter of 1.52 mm or more but less than 5.1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7223.00.00 | 56 | Wire of stainless steel. - Other round: - Other, of a diameter of 5.1 mm or more but less than 6.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7223.00.00 | 57 | Wire of stainless steel. - Other round: - Other, of a diameter of 6.5 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7223.00.00 | 90 | Wire of stainless steel. - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.24 | Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel. | ||||
| 7224.10.00 | 00 | Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel. - Ingots and other primary forms | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7224.90.00 | 00 | Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel. - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.25 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. | ||||
| 7225.11.00 | 00 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Of silicon-electrical steel: - Grain-oriented | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.19.00 | 00 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Of silicon-electrical steel: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.30.00 | 00 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, in coils | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.40.00 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7225.40.00 | 10 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Heat treated: - Heat treated | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.40.00 | 20 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, tool steel: - Other, of a width of 600 mm or more but not exceeding 1,525 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.40.00 | 30 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, of a width exceeding 1,525 mm but not exceeding 1,830 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.40.00 | 40 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, of a width exceeding 1,830 mm but not exceeding 2,450 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.40.00 | 50 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, of a width exceeding 2,450 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.50.00 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than cold-rolled (cold-reduced) | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7225.50.00 | 10 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than cold-rolled (cold-reduced) - Of a thickness not exceeding 4.75 mm: - Of a thickness of less than 0.5 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.50.00 | 20 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than cold-rolled (cold-reduced) - Of thickness exceeding 4.75 mm: - Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.50.00 | 30 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than cold-rolled (cold-reduced) - Of a thickness exceeding 1 mm but less than 3 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.50.00 | 40 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than cold-rolled (cold-reduced) - Of a thickness of 3 mm or more | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.91.00 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other: - Electrolytically plated or coated with zinc | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7225.91.00 | 10 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other: - Electrolytically plated or coated with zinc - Of a thickness of less than 0.25 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.91.00 | 20 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other: - Electrolytically plated or coated with zinc - Of a thickness of 0.25 mm or more but less than 0.5 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.91.00 | 30 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other: - Electrolytically plated or coated with zinc - Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.91.00 | 40 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other: - Electrolytically plated or coated with zinc - Of a thickness exceeding 1 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.92.00 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other: - Otherwise plated or coated with zinc | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7225.92.00 | 10 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other: - Otherwise plated or coated with zinc - Of a thickness less than 0.25 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.92.00 | 20 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other: - Otherwise plated or coated with zinc - Of a thickness of 0.25 mm or more but less than 0.5 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.92.00 | 30 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other: - Otherwise plated or coated with zinc - Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.92.00 | 40 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other: - Otherwise plated or coated with zinc - Of a thickness exceeding 1 mm | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.99.00 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other: - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7225.99.00 | 20 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other: - Other - Plated or coated with aluminum or aluminum alloys | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7225.99.00 | 90 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other: - Other - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.26 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. | ||||
| 7226.11.00 | 00 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Of silicon-electrical steel: - Grain-oriented | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7226.19.00 | 00 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Of silicon-electrical steel: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7226.20.00 | 00 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Of high speed steel | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7226.91.00 | 00 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Other: - Not further worked than hot-rolled | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7226.92.00 | 00 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Other: - Not further worked than cold-rolled (cold-reduced) | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7226.99.00 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Other: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7226.99.00 | 11 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Other: - Other - Plated or coated with zinc: - Of a thickness of less than 0.25 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7226.99.00 | 12 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Other: - Other - Plated or coated with zinc: - Of a thickness of 0.25 mm or more but less than 0.5 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7226.99.00 | 13 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Other: - Other - Plated or coated with zinc: - Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7226.99.00 | 19 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Other: - Other - Plated or coated with zinc: - Of a thickness exceeding 1 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7226.99.00 | 91 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Other: - Other - Other: - Of a thickness of less than 0.25 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7226.99.00 | 92 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Other: - Other - Other: - Of a thickness of 0.25 mm or more but less than 0.5 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7226.99.00 | 93 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Other: - Other - Other: - Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7226.99.00 | 99 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Other: - Other - Other: - Of a thickness exceeding 1 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.27 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. | ||||
| 7227.10.00 | 00 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Of high speed steel | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7227.20.00 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Of silico-manganese steel | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7227.20.00 | 20 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Of silico-manganese steel - Of welding quality wire rods, as defined in statistical note 4 to this chapter | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7227.20.00 | 90 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Of silico-manganese steel - Other | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7227.90.00 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Other | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7227.90.00 | 11 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Other - Of tool steel (other than high speed steel), not tempered or treated and not partly manufactured: - Of ball-bearing steel | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7227.90.00 | 19 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Other - Of tool steel (other than high speed steel), not tempered or treated and not partly manufactured: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7227.90.00 | 21 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Other - Of other tool steel (other than high-speed steel): - Of ball-bearing steel | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7227.90.00 | 29 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Other - Of other tool steel (other than high-speed steel): - Other | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7227.90.00 | 50 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Other - Other, containing indentations, ribs, grooves or other deformations produced during the rolling process | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7227.90.00 | 60 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Other - Other, of cold heading quality (CHQ) steel, as defined in Statistical Note 3 to this Chapter | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7227.90.00 | 70 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Other - Other, of welding quality wire rods, as defined in Statistical Note 4 to this Chapter | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7227.90.00 | 81 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Other - Other, of a circular cross section: - Of a diameter of less than 14 mm | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7227.90.00 | 82 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Other - Other, of a circular cross section: - Of a diameter of 14 mm or more but not exceeding 19 mm | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7227.90.00 | 83 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Other - Other, of a circular cross section: - Of a diameter of 19 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7227.90.00 | 90 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Other - Other | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.28 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. | ||||
| 7228.10.00 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Bars and rods, of high speed steel | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7228.10.00 | 10 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Bars and rods, of high speed steel - Cold-formed | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.10.00 | 20 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Bars and rods, of high speed steel - Not cold-formed | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.20.00 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Bars and rods, of silico-manganese steel | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7228.20.00 | 40 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Bars and rods, of silico-manganese steel - Cold-formed | - | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.20.00 | 50 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Bars and rods, of silico-manganese steel - Not cold-formed | - | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.30.00 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7228.30.00 | 41 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Of tool steel (other than high-speed steel): - Of ball bearing steel | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.30.00 | 42 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Of tool steel (other than high-speed steel): - Of chipper knife steel, not cold-formed | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.30.00 | 49 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Of tool steel (other than high-speed steel): - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.30.00 | 51 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Concrete reinforcing bars and rods: - With a diameter of 12 mm or less | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.30.00 | 52 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Concrete reinforcing bars and rods: - With a diameter of more than 12 mm but not exceeding 39 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.30.00 | 53 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Concrete reinforcing bars and rods: - With a diameter exceeding 39 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.30.00 | 60 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other, of high-nickel alloy steel | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.30.00 | 71 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter of less than 76 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.30.00 | 72 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter of 76 mm or more but not exceeding 152 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.30.00 | 73 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter of 152 mm or more but not exceeding 228 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.30.00 | 74 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter exceeding 228 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.30.00 | 81 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other, of rectangular cross section: - With a minimum cross section less than 152mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.30.00 | 82 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other, of rectangular cross section: - With a maximum cross section of 152mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.30.00 | 90 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.40.00 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than forged | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7228.40.00 | 10 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than forged - Mold steel | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.40.00 | 20 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than forged - Tool steel | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.40.00 | 90 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than forged - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.50.00 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than cold-formed or cold-finished | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7228.50.00 | 10 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than cold-formed or cold-finished - Mold steel | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.50.00 | 20 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than cold-formed or cold-finished - Tool steel | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.50.00 | 90 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than cold-formed or cold-finished - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.60.00 | 00 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7228.70.00 | 11 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - L sections, not further worked than hot-rolled, cold-rolled, drawn or extruded: - Equal legs | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 12 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - L sections, not further worked than hot-rolled, cold-rolled, drawn or extruded: - Unequal legs | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 21 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - Wide flange H sections, not further worked than hot-rolled, cold-rolled, drawn or extruded: - Of a height not exceeding 150 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 22 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - Wide flange H sections, not further worked than hot-rolled, cold-rolled, drawn or extruded: - Of a height exceeding 150 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 30 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - Other H sections, not further worked than hot-rolled, cold-rolled, drawn or extruded | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 41 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - I sections, not further worked than hot-rolled, cold-rolled, drawn or extruded: - American standard, of a height not exceeding 150 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 42 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - I sections, not further worked than hot-rolled, cold-rolled, drawn or extruded: - American standard, of a height exceeding 150 mm | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 49 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - I sections, not further worked than hot-rolled, cold-rolled, drawn or extruded: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 50 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - U sections, not further worked than hot-rolled, cold-rolled, drawn or extruded | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 60 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - T sections, not further worked than hot-rolled, cold-rolled, drawn or extruded | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 70 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - Z sections, not further worked than hot-rolled, cold-rolled, drawn or extruded | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 81 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - Other shapes or sections, not further worked than hot-rolled, cold-rolled, drawn or extruded: - Bearing pile | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 82 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - Other shapes or sections, not further worked than hot-rolled, cold-rolled, drawn or extruded: - Curved grader blade sections | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 83 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - Other shapes or sections, not further worked than hot-rolled, cold-rolled, drawn or extruded: - Track shoe profile bars of steel, of a width of 190 mm or more but not exceeding 350 mm and of a height not exceeding 150 mm, for use in the manufacture of track shoes for track-laying machinery or vehicles | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 89 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - Other shapes or sections, not further worked than hot-rolled, cold-rolled, drawn or extruded: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 91 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - Other: - L sections | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 92 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - Other: - H or I sections | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 93 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - Other: - U sections | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.70.00 | 99 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections - Other: - Other | KGM | Free | CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.80.00 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Hollow drill bars and rods | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7228.80.00 | 11 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Hollow drill bars and rods - Not further worked than hot-rolled: - Round, alloy steel | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.80.00 | 12 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Hollow drill bars and rods - Not further worked than hot-rolled: - Round, non-alloy steel | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.80.00 | 18 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Hollow drill bars and rods - Not further worked than hot-rolled: - Other, alloy steel | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.80.00 | 19 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Hollow drill bars and rods - Not further worked than hot-rolled: - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.80.00 | 91 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Hollow drill bars and rods - Other: - Round, alloy steel | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.80.00 | 92 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Hollow drill bars and rods - Other: - Round, non-alloy steel | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.80.00 | 98 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Hollow drill bars and rods - Other: - Other, alloy steel | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7228.80.00 | 99 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Hollow drill bars and rods - Other: - Other | KGM | Free | CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 72.29 | Wire of other alloy steel. | ||||
| 7229.20.00 | Wire of other alloy steel. - Of silico-manganese steel | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7229.20.00 | 11 | Wire of other alloy steel. - Of silico-manganese steel - Round, of a diameter not exceeding 1.6 mm, containing by weight less than 0.2% of carbon, more than 0.9% of manganese, and more than 0.6% of silicon, suitable for electric arc-welding: - Plated or coated with copper | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7229.20.00 | 19 | Wire of other alloy steel. - Of silico-manganese steel - Round, of a diameter not exceeding 1.6 mm, containing by weight less than 0.2% of carbon, more than 0.9% of manganese, and more than 0.6% of silicon, suitable for electric arc-welding: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7229.20.00 | 90 | Wire of other alloy steel. - Of silico-manganese steel - Other | KGM | Free | AUT, NZT, CCCT, LDCT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7229.90.00 | Wire of other alloy steel. - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free | |
| 7229.90.00 | 30 | Wire of other alloy steel. - Other - Of high-speed steel | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7229.90.00 | 40 | Wire of other alloy steel. - Other - Other flat | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7229.90.00 | 51 | Wire of other alloy steel. - Other - Other round, of a diameter not exceeding 1.6 mm, containing by weight less than 0.2% of carbon and more than 0.3% of nickel or more than 0.08% of molybdenum, suitable for electric arc-welding: - Plated or coated with copper | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7229.90.00 | 59 | Wire of other alloy steel. - Other - Other round, of a diameter not exceeding 1.6 mm, containing by weight less than 0.2% of carbon and more than 0.3% of nickel or more than 0.08% of molybdenum, suitable for electric arc-welding: - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7229.90.00 | 61 | Wire of other alloy steel. - Other - Other round, containing by weight 1.2% or more of silicon and 0.6% or more of chromium: - Of a diameter of less than 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7229.90.00 | 62 | Wire of other alloy steel. - Other - Other round, containing by weight 1.2% or more of silicon and 0.6% or more of chromium: - Of a diameter of 1 mm or more but less than 1.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7229.90.00 | 63 | Wire of other alloy steel. - Other - Other round, containing by weight 1.2% or more of silicon and 0.6% or more of chromium: - Of a diameter of 1.5 mm or more but less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7229.90.00 | 64 | Wire of other alloy steel. - Other - Other round, containing by weight 1.2% or more of silicon and 0.6% or more of chromium: - Of a diameter of 3 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7229.90.00 | 71 | Wire of other alloy steel. - Other - Other round: - Of a diameter of less than 1 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7229.90.00 | 72 | Wire of other alloy steel. - Other - Other round: - Of a diameter of 1 mm or more but less than 1.5 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7229.90.00 | 73 | Wire of other alloy steel. - Other - Other round: - Of a diameter of 1.5 mm or more but less than 3 mm | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7229.90.00 | 74 | Wire of other alloy steel. - Other - Other round: - Of a diameter of 3 mm or more | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
| 7229.90.00 | 90 | Wire of other alloy steel. - Other - Other | KGM | Free | AUT, NZT, CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Page details
- Date modified: