Certain Copper Pipe Fittings 2
Dumping & Subsidizing (Vietnam)

Product Information

Product Definition

The subject goods are defined as:

“Pressure pipe fittings and drainage, waste and vent pipe fittings, made of cast copper alloy, wrought (or “wrot”) copper alloy or wrought copper for use in heating, plumbing, air conditioning and refrigeration applications originating in or exported from the Socialist Republic of Vietnam, restricted to the products enumerated in Appendix 1.”

Appendix 1

List of Goods Subject to the Investigations

The following information is to be taken into consideration in identifying copper pipe fittings (subject goods) being investigated by the Canada Border Services Agency (CBSA):

  1. The subject goods are identified in terms of imperial measurement, i.e. inches. The CBSA is also investigating subject goods that encompass the metric equivalents of the imperial measurement. The term metric equivalent refers to those fittings that are soft converted equivalents of the imperial sized fittings and does not include fittings made specifically in metric dimensions.
  2. The subject goods are identified either as a wrought product or as a cast product. Where a subject good contains an asterisk ("*"), the CBSA is investigating both the wrought product and the cast product.
  3. The subject goods are identified in terms of nominal size. Plumbing and heating fittings are marked according to nominal sizes that correspond to the inside diameters, while fittings for air conditioning and refrigeration are based on actual outer diameter sizes. The CBSA is also investigating subject goods that are described in terms of their outside diameter size. To determine the nominal size of a fitting that is measured in terms of its outside diameter size, always subtract 1/8 inch from the outside diameter size.
  4. The subject goods are identified using abbreviated terms provided by the complainant (Cello Products Inc.). The following is a list of the terms:
Abbreviation Chart
C Copper Tube Cupped End or Sweat End LT Long Turn
M Male NPT Thread MJ Mechanical Joint
FE Female NPT Thread DWV Drainage, Waste, Vent
SJ Slip Joint End TY 90˚ Drainage Tee
FTG Fitting End (Street End) Y 45˚ Drainage Tee
Subject Copper Pipe Fittings Cast & Wrot Subject Copper Pipe Fittings Cast & Wrot
3 X 4 CLOSET FLANGE * 1 X 5/8 CXC WROT COUPLING *
4 X 4 CLOSET FLANGE * 1 X 3/4 CXC WROT COUPLING *
3 X 1-1/2 FITXC CAST DWV BUSH * 1-1/4 CXC WROT P COUPLING *
4 X 1-1/2 CXC CAST DWV CPLGS * 1-1/4 X 1/2 CXC WROT COUPLINGS *
4 X 3 CXC CAST DWV COUPLING * 1-1/4 X 3/4 CXC WROT COUPLING *
1-1/4 CXCXC 45 Y'S * 1-1/4 X 1 CXC WROT COUPLING *
1-1/2 CXCXC 45 DWV Y'S * 3/8 X 1/8 FTGXC WROT BUSHING *
1-1/2CX 1-1/4CX 1-1/4C 45 Y'S * 3/8 X 1/4 FITXC WROT BUSHING *
1-1/2CX 1-1/4CX 1-1/2C 45 Y'S * 1/2 X 1/4 FITXC WROT BUSHING *
1-1/2CX 1-1/2CX 1-1/4C 45 Y'S * 1/2 X 3/8 FITXC WROT BUSHING *
2 CXCXC 45 DWV Y'S * 5/8 X 1/4 WROT P BUSHING *
2CX 1-1/4CX 1-1/4C 45 Y'S * 5/8 X 3/8 FITXC WROT BUSHING *
2CX 1-1/4CX 1-1/2C 45 Y'S * 5/8 X 1/2 FITXC WROT BUSHING *
2CX 1-1/4CX 2C 45 Y'S * 3/4 X 1/4 FITXC WROT BUSHING *
2CX 1-1/2CX 1-1/4C 45 Y'S * 3/4 X 3/8 FITXC WROT BUSHING *
2CX 1-1/2CX 1-1/2C 45 Y'S * 3/4 X 1/2 FITXC WROT BUSHING *
2CX 1-1/2CX 2C 45 Y'S * 3/4 X 5/8 FITXC WROT BUSHING *
2CX 2CX 1-1/4C 45 Y'S * 1 X 3/8 FITXC WROT BUSHING *
2CX 2CX 1-1/2C 45 Y'S * 1 X 1/2 FITXC WROT BUSHING *
3 CXCXC 45 DWV Y'S * 1 X 5/8 FITXC WROT BUSHING *
3C X 2C X 2C DWV 45 Y'S * 1 X 3/4 FITXC WROT BUSHING *
3CX 3CX 1-1/4C 45 Y'S * 1-1/4 X 1/2 FITXC WROT BUSHING *
3CX 3CX 1-1/2C 45 Y'S * 1-1/4 X 3/4 FITXC WROT BUSHING *
3CX 3CX 2C 45 Y'S * 1-1/4 X 1 FITXC WROT BUSHING *
4 CXCXC 45 Y'S * 1-1/2 X 1/2 FITXC WROT BUSHING *
4CX 4CX 2C 45 Y'S * 1-1/2 X 3/4 FITXC WROT BUSHING *
4CX 4CX 3C 45 Y'S * 1-1/2 X 1 FITXC WROT BUSHING *
1-1/4 DWV TY'S * 1-1/2 X1-1/4 FITXC WROT P BUSH *
1-1/2 DWV TY'S * 2 X 1/2 FITXC WROT BUSHING *
1-1/2 X 1-1/4 X 1-1/4 DWV TY'S * 2 X 3/4 FITXC WROT BUSHING *
1-1/2 X 1-1/4 X 1-1/2 DWV TY'S * 2 X 1 FITXC WROT BUSHING *
1-1/2 X 1-1/2 X 1-1/4 DWV TY'S * 2 X 1-1/4 FITXC WROT P BUSHING *
3 FTG X C X C DWV TY'S * 2 X 1-1/2 FITXC WROT P BUSHING *
3 X 3 X 1-1/4 FITXCXC DWV TY'S * 1-1/2 CXC WROT P COUPLING *
3 X 3 X 1-1/2 FITXCXC DWV TY * 2-1/2 X 1 FITXC WROT BUSHING *
3 X 3 X 2 FITXCXC DWV TYS * 2-1/2 X 1-1/4 FITXC WROT BUSH *
2 DWV TY'S * 2-1/2 X 1-1/2 FITXC WROT BUSH *
2 X 1-1/4 X 1-1/4 DWV TY'S * 2-1/2 X 2 FITXC WROT BUSHING *
2 X 1-1/4 X 1-1/2 DWV TY'S * 1-1/2 X 1/2 CXC WROT COUPLING *
2 X 1-1/4 X 2 DWV TY'S * 1-1/2 X 3/4 CXC WROT COUPLING *
2 X 1-1/2 X 1-1/4 DWV TY'S * 1-1/2 X 1 CXC WROT COUPLING *
2 X 1-1/2 X 1-1/2 DWV TY'S * 1-1/2 X 1-1/4 CXC WROT P CPLG *
2 X 1-1/2 X 2 DWV TY'S * 3 X 1/2 FITXC WROT P BUSHING *
2 X 2 X 1-1/4 DWV TY'S * 3 X 3/4 FITXC WROT P BUSHING *
2 X 2 X 1-1/2 DWV TY'S * 3 X 1 FITXC WROT P BUSHING *
1-1/2 CXCXFE CAST DWV TY * 3 X 1-1/4 FITXC WROT P BUSHING *
2 CXCXFE CAST DWV TY   3 X 1-1/2 FITXC WROT P BUSHING *
2 X 1-1/2 X 1-1/2 CCF DWV TYS   3 X 2 FITXC WROT P BUSHING *
3 DWV TY'S * 3 X 2-1/2 FITXC WROT BUSHING *
3 X 1-1/2 X 1-1/4 DWV TY'S * 3-1/2 X 2 FITXC WROT P BUSHING *
3 X 2 X 1-1/2 CXCXC DWV TY'S * 3-1/2 X 2-1/2 FITXC WROT BUSH *
3 X 3 X 1-1/4 DWV TY'S * 3-1/2 X 3 FITXC WROT BUSHING *
3 X 3 X 1-1/2 DWV TY'S * 4 X 1-1/4 FITXC WROT BUSHING *
3 X 3 X 2 DWV TY'S * 4 X 1-1/2 FITXC WROT BUSHING *
4 DWV TY'S * 4 X 2 FITXC WROT P BUSHING *
4 X 4 X 1-1/2 DWV TY'S * 4 X 2-1/2 FITXC WROT BUSHING *
4 X 4 X 2 DWV TY'S * 4 X 3 FITXC WROT P BUSHING *
4 X 4 X 3 DWV TY'S * 4 X 3-1/2 FITXC WROT BUSHING *
1-1/4 CXFE CAST DWV ADAPTER * 2 CXC WROT P COUPLING *
1-1/2 FITXFE CAST DWV ADAPTER * 2 X 1/2 CXC WROT COUPLING *
1-1/2 CXFE CAST DWV ADAPTER * 2 X 3/4 CXC WROT COUPLING *
1-1/2 X 1-1/4 CXFE CAST ADAPT * 2 X 1 CXC WROT COUPLING *
3 FITXFE CAST DWV ADAPTER * 2 X 1-1/4 CXC WROT P COUPLING *
2 CXFE CAST DWV ADAPTER * 2 X 1-1/2 CXC WROT P COUPLING *
3 CXFE CAST DWV ADAPTER * 2-1/2 CXC WROT P COUPLING *
4 CXFE CAST DWV ADAPTER * 2-1/2 X 3/4 CXC WROT COUPLING *
1-1/4 CXM CAST DWV ADAPTER * 2-1/2 X 1 CXC WROT P CPLGS *
1-1/4X1-1/2 CXM CAST DWV ADAPT * 2-1/2 X 1-1/4 CXC WROT CPLG *
1-1/2 FTGXM CAST DWV ADAPTER * 2-1/2 X 1-1/2 CXC WROT CPLG *
1-1/2 CXM CAST DWV ADAPTER * 2-1/2 X 2 CXC WROT COUPLING *
1-1/2X1-1/4 CXM CAST DWV ADAPT * 3 CXC WROT P COUPLING *
2 CXM CAST DWV ADAPTER * 3 X 3/4 CXC WROT P COUPLING *
2 X 1-1/2 CXM CAST DWV ADAPT * 3 X 1 CXC WROT P COUPLING *
3 CXM CAST DWV ADAPTER * 3 X 1-1/4 CXC WROT P COUPLING *
4 CXM CAST DWV ADAPTER * 3 X 1-1/2 CXC WROT P COUPLING *
1-1/4 X 2 CXSP CAST FERRULES * 3 X 2 CXC WROT P COUPLING *
1-1/2 X 2 CXSP CAST FERRULES * 3 X 2-1/2 CXC WROT P COUPLING *
1-1/2 X 3 CXSP CAST FERRULE * 3-1/2 CXC WROT P COUPLING *
2 CXSP CAST FERRULES * 3-1/2 X 3 CXC WROT COUPLING *
2 X 3 CXSP CAST FERRULE * 4 CXC WROT P COUPLING *
2 X 4 CXSP CAST FERRULES * 4 X 1-1/2 CXC WROT P COUPLING *
3 CXSP CAST FERRULES * 4 X 2 CXC WROT P COUPLING *
3 X 4 CXSP CAST FERRULES * 4 X 2-1/2 CXC WROT COUPLING *
4 CXSP CAST FERRULES * 4 X 3 CXC WROT P COUPLING *
3 X 4 CXSP CAST ECC FERRULES * 4 X 3-1/2 CXC WROT COUPLING *
1-1/4 X 2 CXMJ CAST ADAPTER * 5 CXC WROT PRESS COUPLING *
1-1/4 X 3 CXMJ DWV ADAPTER * 6 CXC WROT PRESS COUPLING *
1-1/2 X 2 CXMJ CAST ADAPTER * 6 X 2-1/2 WROT COUPLINGS *
1-1/2 X 3 CXMJ CAST ADAPTER * 1-1/4 X 3/4 CXC WROT ECC CPLG *
1-1/2 X 4 CXMJ CAST ADAPTER * 1-1/4 X 1 CXC WROT ECC CPLG *
2 X 3 CXMJ CAST ADAPTER * 1/8 CXC WROT CPLGS NO STOP *
2 X 4 CXMJ CAST ADAPTER * 1/4 CXC NSTOP WROT CPLGS *
3 CXMJ CAST ADAPTER * 3/8 CXC WROT CPLGS NO STOP *
3 X 4 CXMJ CAST ADAPTER * 1/2 CXC WROT CPLGS NO STOP *
4 CXMJ CAST ADAPTER * 5/8 CXC WROT CPLGS NO STOP *
6 C X M J CAST DWV ADAPTER * 3/4 CXC WROT CPLGS NO STOP *
1-1/4 CXC 11-1/4 CAST ELBOW * 1 CXC WROT CPLGS NO STOP *
1-1/2 CXC 11-1/4 CAST ELBOW * 1-1/4 CXC WROT CPLGS NO STOP *
2 CXC 11-1/4 CAST ELBOW * 1-1/2 CXC WROT CPLGS NO STOP *
3 CXC 11-1/4 CAST ELBOW * 2 CXC WROT CPLGS NO STOP *
4 C X C 11-1/4 CAST ELBOW * 2-1/2 CXC WROT CPLG NO STOP *
1-1/4 CXC 22-1/2 CAST ELBOW * 3 CXC WROT CPLGS NO STOP *
1-1/2 CXC 22-1/2 CAST ELBOW * 4 CXC WROT CPLGS NO STOP *
2 CXC 22-1/2 CAST ELBOW * 5 CXC WROT CPLGS NO STOP *
3 CXC 22-1/2 CAST ELBOW * 6 CXC WROT CPLGS NO STOP *
4 CXC 22-1/2 CAST ELBOW * 1/2 X 3 CXC REPAIR COUPLING  
3 FITXC 45 CAST DWV ELBOW * 1/2 X 6 C X C REPAIR COUPLING  
4 FITXC 45 CAST DWV ELBOW * 3/4 X 3 C X C REPAIR COUPLING  
2 CXM CAST DWV 45 ELBOW * 1/8 CXC P RING COUPLING *
1-1/4 CXC 45 CAST DWV ELBOW * 1/4 CXC RING COUPLINGS *
1-1/2 CXC 45 CAST DWV ELBOW * 3/8 CXC P RING COUPLING *
2 CXC 45 CAST DWV ELBOW * 1/2 CXC RING COUPLINGS *
3 CXC 45 CAST DWV ELBOW * 5/8 CXC P RING COUPLING *
4 CXC 45 CAST DWV ELBOW * 3/4 CXC RING COUPLINGS *
1-1/4 CXC 60 CAST ELBOW * 1 CXC P RING COUPLING *
1-1/2 CXC 60 CAST ELBOW * 1-1/4 CXC P RING COUPLING *
2 CXC 60 CAST ELBOW * 1-1/2 CXC P RING COUPLING *
3 CXC 60 CAST ELBOW * 2 CXC P RING COUPLING *
1-1/4 CXC 90 CAST DWV ELBOW * 2-1/2 CXC RING COUPLINGS *
1-1/4 FITXC 90 CAST DWV ELBOW * 3 CXC P RING COUPLING *
1-1/2 FITXC 90 CAST DWV ELBOW * 4 CXC P RING COUPLING *
2 FITXC 90 CAST DWV ELBOW * 1/2 X 3-1/4 FTGXC SLIDE CPLG  
1-1/2 CXC 90 CAST DWV ELBOW * 3/4 X 5 FTGXC SLIDE COUPLING  
1-1/2 X 1-1/4 CXC DWV 90 ELBOW * 1/4 C X FE WROT ADAPTERS *
3 CAST DWV FTGXC 90 ELBOW * 3/8 C X FE WROT ADAPTERS *
4 FITXC 90 CAST DWV ELBOW * 3/8 X 1/4 CXFE WROT ADAPTERS *
2 CXC 90 CAST DWV ELBOW * 3/8 X 1/2 CXFE WROT ADAPTERS *
2X 1-1/4 CXC 90 CAST DWV ELBOW * 1/2 C X FE WROT ADAPTERS *
2 X 1-1/2 CXC 90 CAST DWV ELB * 1/2 X 1/4 CXFE WROT ADAPTER *
1-1/2 CXFE 90 CAST DWV ELBOW * 1/2 X 3/8 CXFE WROT ADAPTER *
2 CXFE 90 CAST DWV ELBOW * 1/2 X 3/4 CXFE WROT ADAPTER *
1-1/2 CXM 90 CAST DWV ELBOW   1/2 X 1 CXFE WROT ADAPTER *
2 CXM 90 CAST DWV ELBOW   5/8 X 1/2 CXFE WROT ADAPTER *
3 CXC 90 CAST DWV ELBOW   5/8 X 3/4 CXFE WROT ADAPTER *
4 CXC 90 CAST DWV ELBOW   3/4 C X FE WROT ADAPTERS *
1-1/2 TUBE END CLEANOUTS * 3/4 X 1/2 CXFE WROT ADAPTER *
3 TUBE END CLEANOUTS * 3/4 X 1 CXFE WROT ADAPTER *
3 FTG CLEANOUT - FLUSH TYPE * 3/4 X 1-1/4 CXFE WROT ADAPTER *
4 FTG CLEANOUT - FLUSH TYPE * 3/4 X 1-1/2 CXFE WROT ADAPTER *
1-1/4 FTG CLEANOUT - FULL PLUG * 1 C X FE WROT ADAPTER *
1-1/2 FTG CLEANOUT - FULL PLUG * 1 X 1/2 CXFE WROT ADAPTER *
2 FTG CLEANOUT - FULL PLUG * 1 X 3/4 CXFE WROT ADAPTER *
3 FTG CLEANOUT - FULL PLUG * 1 X 1-1/4 CXFE WROT ADAPTER *
4 FTG CLEANOUT - FULL PLUG * 1 X 1-1/2 CXFE WROT ADAPTER *
1-1/4 FITXSJ CAST ADAPTER * 1-1/4 C X FE WROT ADAPTER *
4 ACT(3S)X1-1/2C-30 ROOF ADAPT * 1-1/4 C X 3/4 FEMALE WROT ADAP *
4 ACT(3S) X 2C-30 ROOF ADAPTER * 1-1/4 X 1 CXFE WROT ADAPTERS *
4 SOIL(5A)X 1-1/2 C ROOF ADAPT * 1-1/4 X 1-1/2 CXFE WROT ADAPTR *
2 C X SJ DWV COUPLING * 1-1/4 X 2 CXFE WROT PRESS ADAP *
3/4 CXC CAST COUPLINGS * 1/4 FITXFE WROT ADAPTER *
1-1/4 CXC CAST P COUPLINGS * 3/8 FITXFE WROT ADAPTER *
1/2 CXCXFE CAST TEE   3/8 X 1/4 FTG X FE WROT ADAPT *
1/2 X 1/2 X 1/4 CXCXFE C TEE   1/2 FITXFE WROT ADAPTER *
1/2C X 1/2C X 3/8FE CAST TEE   1/2 X 1/4 FTGXFE WROT ADAPTER *
1/2 X 1/2 X 3/4 CXCXF CAST TEE   1/2 X 3/8 FITT X FE ADAPTER *
3/4 CXCXFE CAST TEE   1/2 FTG X 3/4 FE WROT ADAPTER *
3/4C X 1/2C X 1/2FE CAST TEE   3/4 FITXFE WROT ADAPTER *
3/4 X 1/2 X 3/4 CXCXF CAST TEE   3/4 FTG X 1/2 FEMALE WROT ADAP *
3/4 X 3/4 X 3/8 CCFE CAST TEE   1 FITXFE WROT ADAPTER *
3/4C X 3/4C X 1/2FE CAST TEE   1 FTG X 3/4 FEMALE WROT ADAPTE *
3/4 X 3/4 X 1 CXCXFE CAST TEE   1-1/4 FITXFE WROT ADAPTER *
1 CXCXFE CAST TEE   1-1/2 FITXFE WROT ADAPTER *
1 X 1 X 1/2 CXCXFE CAST TEE   2 FITXFE WROT ADAPTERS *
1 X 1 X 3/4 CXCXFE CAST TEE   1-1/2 C X FE WROT ADAPTER *
1-1/4 CXCXFE CAST TEE   2-1/2 FITXFE WROT ADAPTER *
1-1/4 X 1-1/4 X 1/2 CCFE TEE   1-1/2 C X 1 FEMALE ADAPTER *
1-1/4 X 1-1/4 X 3/4 CCFE TEE   1-1/2 X 1-1/4 CXFE WROT ADAPT *
1-1/4X1-1/4X1 CCFE TEE   1-1/2 X 2 CXFE WROT ADAPTER *
1-1/2 CXCXFE CAST TEE   3 FITXFE WROT ADAPTER *
1-1/2X1-1/2X1/2 CCFE TEE   3/4 CXC WROT UNION *
1-1/2 X 1-1/2 X 3/4 CCFE TEE   1 CXC WROT UNION *
1-1/2 X 1-1/2 X 1 CCFE TEE   2 C X FE WROT ADAPTER *
1/2 CXFEXFE CAST TEE   1-1/4 CXC WROT UNION *
1/2C X 3/4F X 1/2F CAST TEE   2 X 1 C X FE WROT ADAPTER *
3/4 C X FE X FE CAST TEE   2 X 1-1/4 CXFE WROT ADAPTER *
3/4 C X 3/4 FE X 1/2 FE TEE   2 X 1-1/2 CXFE WROT ADAPTER *
2 CXCXFE CAST TEE   1-1/2 C X C WROT UNION *
2 X 2 X 1/2 CXCXFE CAST TEE   1/2 C X FE WROT UNION *
2 X 2 X 3/4 CXCXFE CAST TEE   3/4 C X FE WROT UNION *
2 X 2 X 1 CXCXFE CAST TEE   1 C X FE WROT UNION *
5 X 4 FITXC CAST BUSHING * 2 CXC WROT UNIONS *
6 X 2 FITXC CAST BUSHING * 1-1/4 C X FE WROT UNION *
6 X 3 FITXC CAST BUSHING * 1-1/2 C X FE WROT UNION *
6 X 4 FITXC CAST BUSHING * 2 C X FE WROT UNION *
6 X 5 FTGXC CAST P BUSHING * 1/2 C X M WROT UNION *
3/8 C X FE X C CAST TEE   3/4 C X M WROT UNIONS *
1/2 CXFEXC CAST TEE   1 C X M WROT UNION *
1/2C X 1/2FE X 3/4C CAST TEE   1-1/4 C X M WROT UNION *
1/2C X 3/4FE X 1/2C CAST TEE   1-1/2 C X M WROT UNION *
3/4 CXFEXC CAST TEE   2 C X M WROT UNION *
3/4 X 1/2 X 1/2 CXFEXC TEE   2-1/2 C X FE WROT ADAPTER *
3/4C X 1/2FE X 3/4C CAST TEE   3 C X FE WROT ADAPTERS *
3/4C X 3/4FE X 1/2C CAST TEE   1/2 CXC WROT CROSSOVER CPLG *
1 CXFEXC CAST TEE   3/4 CXC WROT CROSSOVER CPLG *
1C X 1/2F X 1C CAST TEE   1/4 CXM WROT ADAPTER *
1 X 3/4 X 1 CXFXC CAST TEE   1/4 X 3/8 CXM WROT ADAPT *
1-1/4 CXFEXC CAST TEE   1/4 X 1/2 CXM WROT ADAPTER *
1-1/4 X 1/2 X 1-1/4 CXFEXC TEE   3/8 CXM WROT ADAPTER *
1-1/4 X 3/4 X 1-1/4 CXFEXC TEE   3/8 X 1/4 CXM WROT ADAPTER *
1-1/2 C X FE X C CAST TEE   3/8 X 1/2 CXM WROT ADAPTER *
1-1/2X1/2X1-1/2 CXFXC CAST TEE   1/2 CXM WROT ADAPTER *
1-1/2X3/4X1-1/2 CXFEXC TEE   1/2 X 1/4 CXM WROT ADAPTER *
1/2 FEXFEXC CAST TEE   1/2 X 3/8 CXM WROT ADAPTER *
3/4 FEXFEXC CAST TEE   1/2 X 3/4 CXM WROT ADAPTER *
3/4FE X 1/2FE X 1/2C CAST TEE   1/2 X 1 CXM WROT ADAPTER *
3/4FE X 1/2FE X 3/4C CAST TEE   5/8 X 1/2 CXM WROT ADAPTER *
3/4FE X 3/4FE X 1/2C CAST TEE   5/8 X 3/4 CXM WROT ADAPTER *
2 C X FE X C CAST TEE   3/4 CXM WROT ADAPTER *
2 X 1/2 X 2 CXFEXC TEE   3/4 C X 3/8 WROT MALE ADAPTER *
2 X 3/4 X 2 CXFXC CAST TEE   3/4 X 1/2 CXM WROT ADAPTER *
4 CXC CAST P COUPLINGS * 3/4 X 1 CXM WROT ADAPTER *
5 X 3 CXC CAST COUPLING * 3/4 X 1-1/4 CXM WROT ADAPTER *
5 X 4 CXC CAST COUPLING * 3/4 X 1-1/2 CXM WROT ADAPTER *
6 X 2 CXC CAST PRESS COUPLING * 1 CXM WROT ADAPTER *
6 X 3 CXC CAST P COUPLINGS * 1 X 1/2 CXM WROT ADAPTER *
6 X 4 CXC CAST P COUPLINGS * 1 X 3/4 CXM WROT ADAPTER *
6 X 5 CXC CAST COUPLING * 1 X 1-1/4 CXM WROT ADAPTER *
3/4 X 1/2 CXC CAST ECC COUPL * 1 X 1-1/2 CXM WROT ADAPTER *
1 X 1/2 CAST ECC COUPLING * 1 X 2 CXMALE PRESSURE ADAPTER *
1 X 3/4 CXC CAST ECC COUPLING * 1-1/4 CXM WROT ADAPTER *
1-1/4 X 1/2 CAST ECC COUPLING * 1-1/4 X 3/4 CXM WROT ADAPTER *
1-1/2 X 1 CXC CAST ECC COUPLIN * 1-1/4 X 1 CXM WROT ADAPTER *
1-1/2 X 1-1/4 CXC ECC CPLGS * 1-1/4 X 1-1/2 CXM WROT ADAPT *
2 X 1-1/4 CXC CAST ECC CPLGS * 1-1/4 X 2 CXMALE PRESSURE ADAP *
2 X 1-1/2 CXC CAST ECC CPLGS * 1/4 FITXM WROT ADAPTER *
3 X 2 CXC CAST ECC COUPLING * 3/8 FITXM WROT ADAPTERS *
1/2 CXFE CAST ADAPTER * 1/2 FITXM WROT ADAPTER *
1/2 X 3/8 CXFE CAST ADAPTER * 1/2 X 3/8 FITXM WROT ADAPTER *
1/2 X 3/4 CXFE CAST ADAPTER * 1/2 X 3/4 FITXM WROT ADAPTER *
3/4 CXFE CAST ADAPTER * 3/4 FITXM WROT ADAPTER *
3/4 X 1/2 CXFE CAST ADAPTER * 3/4 X 1/2 FITTXM WROT ADAPTER *
3/4 X 1 CXFE CAST ADAPTER * 1 FITXM WROT ADAPTER *
3/4 X 1-1/4 CXFE CAST ADAPTER * 1 X 3/4 FITTXM WROT ADAPTER *
3/4 X 1-1/2 CXFE CAST ADAPTER * 1-1/4 FITXM WROT ADAPTER *
1 C X FE CAST ADAPTER * 1-1/2 FITXM WROT ADAPTER *
1 X 1/2 CXFE CAST ADAPTER * 2 FITXM WROT ADAPTER *
1 X 3/4 C X FE CAST ADAPTER * 1-1/2 CXM WROT ADAPTER *
1 X 1-1/4 CXFE CAST ADAPTER * 2-1/2 FITXM WROT ADAPTER *
1-1/4 CXFE CAST P ADAPTER * 1-1/2 X 1 CXM WROT ADAPTER *
1-1/4 X 1/2 CXFE CAST ADAPTERS * 1-1/2 X 1-1/4 CXM WROT ADAPT *
1-1/4 X 3/4 CXFE CAST ADAPTER * 1-1/2 X 2 CXM WROT ADAPTER *
1-1/4 X 1 CXFE CAST P ADAPTER * 3 FTG X M WROT ADAPTER *
3/4 X 1/2 FITXFE CAST ADAPTER * 2 CXM WROT ADAPTER *
1 FTGXFE CAST ADAPTER * 2 X 1-1/4 CXM WROT ADAPTER *
1-1/2 CXFE CAST P ADAPTER * 2 X 1-1/2 CXM WROT ADAPTER *
1-1/2 X 3/4 CXFE CAST P ADAPT * 2 X 2-1/2 C X M WROT ADAPTER *
1-1/2 X 1 CXFE CAST ADAPTER * 2-1/2 CXM WROT ADAPTER *
1-1/2 X 2 CXFE CAST ADAPTER * 2-1/2 X 2 CXM WROT ADAPTER *
2 CXFE CAST P ADAPTER * 3 CXM WROT ADAPTER *
2-1/2 CXFE CAST UNION * 4 CXM WROT ADAPTER *
2-1/2 CXC CAST UNION * 1/2 X 3/4 C X HOSE ADAPTER *
2 CXM CAST UNION * 1/4 CXC WROT 45 ELBOW *
2-1/2 C X M CAST UNION * 3/8 CXC WROT 45 ELBOW *
3 CXC CAST UNION * 1/2 CXC WROT 45 ELBOW *
2-1/2 C X FE CAST ADAPTER * 5/8 CXC WROT P 45 ELBOW *
3 CXFE CAST P ADAPTER * 3/4 CXC WROT 45 ELBOW *
1/2 CXCXCXC CAST CROSSES * 1 CXC WROT 45 ELBOW *
3/4 CXCXCXC CAST CROSSES * 1-1/4 CXC WROT P 45 ELBOW *
1 CXCXCXC CAST CROSSES * 1/4 FTG X C WROT 45 ELBOW *
1-1/2 CXCXCXC CAST CROSSES * 3/8 FITXC WROT 45 ELBOW *
2 CXCXCXC CAST CROSS * 1/2 FITXC WROT 45 ELBOW *
3/4 CXC CAST CROSSOVER CPLG * 5/8 FITXC WROT 45 ELBOW *
1/2 CXM CAST ADAPTER * 3/4 FITXC WROT 45 ELBOW *
1/2 X 3/4 CXM CAST ADAPTER * 1 FITXC WROT 45 ELBOW *
1/2 CAST COMP FLANGE - 125#   1-1/4 FITXC WROT P 45 ELBOW *
3/4 CAST COMP FLANGE - 125#   1-1/2 FITXC WROT P 45 ELBOW *
1 CAST COMP FLANGE - 125#   2 FITXC WROT P 45 ELBOW *
1-1/4 CAST COMP FLANGE - 125#   1-1/2 CXC WROT P 45 ELBOW *
1-1/2 CAST COMP FLANGE - 125#   2-1/2 FITXC WROT 45 ELBOW *
2 CAST COMP FLANGE - 125#   2 CXC WROT P 45 ELBOW *
2-1/2 CAST COMP FLANGE - 125#   2-1/2 CXC WROT P 45 ELBOW *
3 CAST COMP FLANGE - 125#   3 CXC WROT P 45 ELBOW *
3-1/2 COMP FLANGE #125   4 CXC WROT P 45 ELBOW *
4 CAST COMP FLANGE - 125#   1/4 CXC WROT 90 ELBOW *
5 CAST COMP FLANGE - 125#   3/8 CXC WROT 90 ELBOW *
6 CAST COMP FLANGE - 125#   1/2 CXC WROT 90 ELBOW *
8 CAST COMP FLANGE - 125#   5/8 CXC WROT 90 ELBOWS *
1/2 CAST COMP FLANGE - 150#   3/4 CXC WROT 90 ELBOW *
3/4 CAST COMP FLANGE - 150#   3/4 X 1/2 CXC WROT 90 ELBOW *
1 CAST COMP FLANGE - 150#   1 CXC WROT 90 ELBOW *
1-1/4 CAST COMP FLANGE - 150#   1 X 1/2 CXC WROT 90 ELBOW *
1-1/2 CAST COMP FLANGE - 150#   1 X 3/4 CXC WROT 90 ELBOW *
2 CAST COMP FLANGE - 150#   1-1/4 CXC WROT P 90 ELBOW *
2-1/2 CAST COMP FLANGE - 150#   1-1/4 X 1 CXC WROT 90 ELBOW *
3 CAST COMP FLANGE - 150#   1/4 FITXC WROT 90 ELBOW *
3-1/2 CAST COMP FLANGE #150   3/8 FITXC WROT 90 ELBOW *
4 X 9 CAST COMP FLANGE - 150#   1/2 FITXC WROT 90 ELBOW *
5 CAST COMP FLANGE - 150#   5/8 FITXC WROT 90 ELBOW *
6 CAST COMP FLANGE -150#   3/4 FITXC WROT 90 ELBOW *
8 CAST COMP FLANGE - 150#   1 FITXC WROT 90 ELBOW *
3/4 CXM CAST ADAPTER * 1-1/4 FITXC WROT 90 ELBOW *
3/4 X 1/2 CXM CAST ADAPTER * 1/2 FTGXFTG WROT 90 ELBOW *
3/4 X 1-1/4 CXM CAST ADAPTER * 3/4 FTG X FTG WROT 90 ELBOWS *
1/2 COMP FLANGES - 300#   1-1/2 FITXC WROT 90 ELBOW *
1 X 5 COMP FLANGES - 300#   2 FITXC WROT 90 ELBOW *
1-1/4 COMP FLANGES - 300#   1-1/2 CXC WROT P 90 ELBOW *
1-1/2 X 6-1/2 COMP FLANGE-300#   2-1/2 FITXC WROT 90 ELBOW *
2 COMP FLANGE - 300#   1-1/2CX 1-1/4C WROT P 90 ELBOW *
2-1/2 CAST COMP FLANGE - 300#   2 CXC WROT P 90 ELBOW *
3 X 8-1/4 COMP FLANGE - 300#   2-1/2 CXC WROT 90 ELBOW *
4 COMP FLANGE - 300#   3 CXC WROT P 90 ELBOW *
1 CXM CAST ADAPTER * 4 CXC WROT P 90 ELBOW *
1 X 1/2 CXM CAST ADAPTER * 1/2 CXC WROT 90 VENT ELBOW *
1 X 1-1/4 CXM CAST ADAPTER * 3/4 CXC WROT 90 VENT ELBOW *
1 X 1-1/2 CXM CAST ADAPTER * 1 CXC WROT 90 VENT ELBOW *
1-1/2 BLIND COMPANION FLANGE   1/4 CXC (LT) WROT 90 ELBOWS  
2 X 6 BLIND COMPANION FLANGE   3/8 CXC (LT) WROT 90 ELBOW  
3 X 7-1/2 BLIND COMP FLANGE   1/2 CXC (LT) WROT 90 ELBOW  
13-1/2 X 8 BLIND COMPANION FLG   5/8 CXC LT 90 ELBOW  
8 COMP FLANGE 125# SILVER BRZD   3/4 CXC (LT) WROT 90 ELBOW  
3 COMP FLANGE 150# SILVER BRZD   1 CXC (LT) WROT 90 ELBOW  
8 COMP FLANGE 150# SILVER BRZD   1-1/4 CXC (LT) WROT 90 ELBOW  
1-1/4 CXM CAST P ADAPTER * 1/4 CXFIT LT 90 ELBOW  
1-1/4 X 1/2 CXM CAST ADAPTER * 3/8 C X FTG LT 90 ELBOWS  
1-1/4 X 1 CXM CAST ADAPT * 1/2 C X FTG LT 90 ELBOWS  
1-1/2 CXM CAST P ADAPTER * 5/8 CXFTG LT 90 ELBOW  
1-1/2 X 3/4 CXM CAST ADAPTER * 3/4 CXFTG LT 90 ELBOW  
2 CXM CAST P ADAPTER * 1 CXFTG LT 90 ELBOW  
2 X 1-1/2 C X M CAST P ADAPT * 1-1/4 CXFTG LT 90 ELBOW  
2-1/2 CXM CAST ADAPTER * 1-1/2 CXFTG LT 90 ELBOW  
3 CXM CAST P ADAPTER * 2 CXFTG LT 90 ELBOW  
1/2C X 1M X 1/2 FE BOILER CPLG   1-1/2 CXC (LT) WROT 90 ELBOWS  
4 CXM CAST ADAPTER * 2 CXC (LT) WROT 90 ELBOW  
1/2 X 1 X 1/2 CXMXFE CAST BOIL   3/4 X 1/8 FE X 3/4 W BASE TEE *
1/2 C X M CAST 45 ELBOWS   1/2 X 1/4 FTGXC FL BUSHING *
3/4 C X M CAST 45 ELBOWS   1/2 X 3/8 FITXC FLUSH BUSHING *
1-1/4 C X M CAST 45 ELBOWS   5/8 X 3/8 FTGXC FL BUSHING *
4 CXC CAST 45 ELBOW   3/4 X 1/2 FITXC FLUSH BUSHING *
6 CXC CAST P 45 ELBOW   1 X 1/2 FITXC FL BUSHING *
1/2 C X C 90 ELBOW CAST   1 X 3/4 FITXC FLUSH BUSHING *
1-1/4 CXC CAST P 90 ELBOW   1-1/4X3/4 FTTXC W FL BUSHING *
1-1/4 X 1/2 CXC CAST 90 ELBOW   1-1/4 X 1 FITXC FLUSH BUSHING *
1-1/4 X 3/4 CAST 90 ELBOWS   1-1/2 X 1 FTGXC FL BUSHING *
1-1/4 X 1 CAST 90 ELBOWS   1-1/2 X 1-1/4 FL BUSH FITXC *
1-1/2 X 1/2 CAST 90 ELBOWS   2 X 1-1/2 FITXC FLUSH BUSHING *
1-1/2 X 3/4 CXC 90 CAST ELBOW   1 X 1/2 FLUSH FEMALE BUSHING *
1-1/2 X 1 CXC 90 CAST ELBOW   1-1/4 X 3/4 FLUSH FEMALE BUSHI *
1/2 CXFE CAST 90 ELBOW   1-1/4 X 1 FITXFE FLUSH FE BUSH *
1/2 X 3/4 CXFE CAST 90 ELBOW   1-1/2 X 1 FTGXFE FLUSH FE BUSH *
1/2 X 1 CXFE CAST 90 ELBOW   1/2 CXM FLUSH VALVE WROT ADAPT *
3/4 CXFE CAST 90 ELBOW   3/4 CXM FLUSH VALVE WROT ADAPT *
3/4 X 1/2 CXFE CAST 90 ELBOW   1/8 CXCXC WROT TEE *
3/4 X 1 CXFE CAST 90 ELBOW   1/4 CXCXC WROT TEE *
1 CXFE CAST 90 ELBOW   3/8 CXCXC WROT TEE *
1 X 1/2 C X FE 90 ELL CAST   1/2 CXCXC WROT TEE *
1 X 3/4 CXFE CAST 90 ELBOW   1/2 X 1/2 X 3/4 CXCXC WROT TEE *
1-1/4 CXFE CAST P 90 ELBOW   3/4 CXCXC WROT TEE *
1-1/4 X 3/4 CXFE CAST 90 ELBOW   3/4 X 1/2 X 1/2 CXCXC WROT TEE *
1-1/4 X 1 CXFE CAST 90 ELBOW   3/4 X 1/2 X 3/4 CXCXC WROT TEE *
1-1/2 CXFE CAST P 90 ELBOW   3/4 X 3/4 X 1/4 WROT P TEE *
1-1/2 X 1 C X FE CP 90 ELBOWS   3/4C X 3/4C X 3/8C WROT P TEE *
2 CXFE CAST P 90 ELBOW   3/4 X 3/4 X 1/2 CXCXC WROT TEE *
3 C X FE CAST 90 ELBOW   1 CXCXC WROT TEE *
1/2 CXM CAST 90 ELBOW   1 X 1/2 X 1/2 CXCXC WROT TEE *
1/2 X 3/8 CXM CAST 90 ELBOW   1 X 1/2 X 3/4 CXCXC WROT TEE *
1/2 X 3/4 CXM CAST 90 ELBOW   1 X 1/2 X 1 CXCXC WROT TEE *
3/4 CXM CAST 90 ELBOW   1 X 3/4 X 1/2 CXCXC WROT TEE *
3/4 X 1/2 CXM CAST 90 ELBOW   1 X 3/4 X 3/4 CXCXC WROT TEE *
3/4 C X 1 M 90 CAST ELBOWS   1 X 3/4 X 1 CXCXC WROT TEE *
1 CXM CAST 90 ELBOWS   1 X 1 X 3/8 CXCXC WROT TEE *
1 X 3/4 CXM CAST 90 ELBOW   1 X 1 X 1/2 CXCXC WROT TEE *
1-1/4 CXM CAST P 90 ELBOW   1 X 1 X 3/4 CXCXC WROT TEE *
1-1/4 X 1 CXM CAST 90 ELBOWS   1-1/4 CXCXC WROT TEE *
1-1/2 CXM CAST P 90 ELBOW   1-1/4 X 1/2 X 1/2 WROT TEE *
2 CXM CAST 90 ELBOW   1-1/4 X 1/2 X 3/4 WROT TEE *
6 CXC CAST 90 ELBOW   1-1/4 X 1/2 X 1 WROT TEE *
1/2C X 1/8FE X 1/2C BASE TEE * 1-1/4 X 1/2 X 1-1/4 WROT TEE *
1/2C X 1/8FE X 3/4C BASE TEE * 1-1/4 X 3/4 X 1/2 WROT TEE *
3/4C X 1/8FE X 3/4C BASE TEE * 1-1/4 X 3/4 X 3/4 WROT TEE *
1C X 1/8FE X 1 C BASE TEE * 1-1/4 X 3/4 X 1 WROT TEE *
1-1/4C X 1/8FEX1-1/4C BASE TEE * 1-1/4 X 3/4 X 1-1/4 WROT TEE *
1 X 1/2 FITXFE FL BUSHING * 1-1/4 X 1 X 1/2 WROT TEE *
1-1/4 X 1 FITXFE FLUSH ADAPTER * 1-1/4 X 1 X 3/4 WROT TEE *
1 1/2 FITT X 1 FE C FLUSH BUSH * 1-1/4 X 1 X 1 WROT TEE *
3/4 CXFTGXC CAST TEE * 1-1/4 X 1 X 1-1/4 WROT TEE *
2 X 2 X 3 CXCXC CAST TEE * 1-1/4 X 1-1/4 X 1/2 WROT TEE *
2-1/2 X 1/2 X 2-1/2 CAST TEE * 1-1/4 X 1-1/4 X 3/4 WROT TEE *
2-1/2 X 1-1/2 X 1-1/2 CAST TEE * 1-1/4C X 1-1/4C X 1C WROT TEE *
5 CXCXC CAST TEE * 1-1/2 CXCXC WROT TEE *
5 X 5 X 3 CXCXC CAST TEE * 1-1/2 X 1/2 X 1/2 WROT TEE *
6 CXCXC CAST TEE * 1-1/2 X 1/2 X 3/4 WROT TEE *
1-1/4 CXC WROT DWV COUPLING * 1-1/2 X 1/2 X 1 CXCXC WROT TEE *
1-1/2X1-1/4 FITXC W DWV BUSH * 1-1/2 X 1/2 X 1-1/4 WROT TEES *
2 X 1-1/4 FITXC WROT DWV BUSH * 1-1/2 X 1/2 X 1-1/2 WROT TEE *
2 X 1-1/2 FITXC W DWV BUSH * 1-1/2 X 3/4 X 1/2 WROT TEE *
1-1/2 CXC WROT DWV COUPLING * 1-1/2 X 3/4 X 3/4 WROT TEE *
1-1/2X 1-1/4 CXC WROT DWV CPLG * 1-1/2 X 3/4 X 1 WROT TEE *
3 X 1-1/4 FITXC WROT DWV BUSH * 1-1/2 X 3/4 X 1-1/4 WROT TEE *
3 X 1-1/2 FITXC WROT DWV BUSH * 1-1/2 X 3/4 X 1-1/2 WROT TEE *
3 X 2 FITXC WROT DWV BUSH * 1-1/2 X 1 X 1/2 WROT TEE *
4 X 2 FTGXC DWV BUSHINGS * 1-1/2 X 1 X 3/4 WROT TEE *
4 X 3 FTGXC WROT DWV BUSHING * 1-1/2 X 1 X 1 WROT TEE *
2 CXC WROT DWV COUPLING * 1-1/2 X 1 X 1-1/4 WROT TEE *
2 X 1-1/4 CXC WROT DWV CPLG * 1-1/2 X 1 X 1-1/2 WROT TEE *
2 X 1-1/2 CXC WROT DWV CPLG * 1-1/2 X 1-1/4 X 1/2 WROT TEE *
3 CXC WROT DWV COUPLING * 1-1/2 X 1-1/4 X 3/4 WROT TEE *
3 X 1-1/4 CXC WROT DWV CPLG * 1-1/2 X 1-1/4 X 1 WROT TEE *
3 X 1-1/2 CXC WROT DWV CPLG * 1-1/2 X 1-1/4 X 1-1/4 WROT TEE *
3 X 2 CXC WROT DWV COUPLING * 1-1/2 X 1-1/4 X 1-1/2 WROT TEE *
4 CXC WROT DWV COUPLING * 1-1/2 X 1-1/2 X 1/2 WROT TEE *
4 X 1-1/2 CXC WROT DWV CPLGS * 1-1/2 X 1-1/2 X 3/4 WROT TEE *
4 X 2 CXC WROT DWV COUPLING * 1-1/2 X 1-1/2 X 1 WROT TEE *
4 X 3 CXC WROT DWV COUPLING * 1-1/2 X 1-1/2 X 1-1/4 WROT TEE *
6 CXC WROT DWV COUPLING * 2 CXCXC WROT TEE *
1-1/4 CXC W DWV CPLGS NO STOP * 2 X 1/2 X 2 WROT TEE *
1-1/2 CXC W DWV CPLGS NO STOP * 2 X 3/4 X 2 WROT TEE *
2 CXC WROT DWV CPLGS NO STOP * 2 X 1 X 3/4 WROT TEE *
3 CXC WROT DWV CPLGS NO STOP * 2 X 1 X 1 WROT TEE *
4 CXC WROT DWV CPLGS NO STOP * 2C X 1C X 1-1/4C WROT TEE *
1-1/4 CXM WROT DWV TRAP BUSHIN * 2 X 1 X 1-1/2 WROT PRESS TEE *
1-1/2 CXM WROT DWV TRAP BUSH * 2 X 1 X 2 WROT TEE *
2 CXM WROT DWV TRAP BUSHING * 2 X 1-1/4 X 1/2 WROT TEE *
1-1/4 CXFE WROT DWV ADAPTER * 2 X 1-1/4 X 3/4 WROT TEE *
1-1/4 X 1-1/2 CXFE WRT DWV ADA * 2 X 1-1/4 X 1 WROT TEE *
1-1/4 FTGXFEMALE DWV ADAPTER * 2 X 1-1/4 X 1-1/4 WROT TEE *
1-1/2 FTGXFE WROT DWV ADAPTER * 2 X 1-1/4 X 1-1/2 WROT TEE *
2 FTGXFEMALE DWV ADAPTER * 2 X 1-1/4 X 2 WROT TEE *
1-1/2 CXFE WROT DWV ADAPTER * 2 X 1-1/2 X 1/2 WROT TEE *
1-1/2 X 1-1/4 CXFE WROT ADAPT * 2 X 1-1/2 X 3/4 WROT TEE *
1-1/2 X 2 CXFE WROT DWV ADAPTE * 2 X 1-1/2 X 1 WROT TEE *
3 FITXFE WROT DWV ADAPTER * 2 X 1-1/2 X 1-1/4 WROT TEE *
2 C X FE WROT DWV ADAPTER * 2 X 1-1/2 X 1-1/2 WROT TEE *
2 X 1-1/2 CXFE WROT DWV ADAPT * 2 X 1-1/2 X 2 WROT TEE *
3 C X FE DWV ADAPTER * 2 X 2 X 1/2 WROT TEE *
1-1/2 MALE X 1-1/2 OD DWV ADAP * 2 X 2 X 3/4 WROT TEE *
1-1/4 CXM WROT DWV ADAPTER * 2 X 2 X 1 WROT TEE *
1-1/4X1-1/2 CXM WROT DWV ADAPT * 2 X 2 X 1-1/4 WROT TEE *
1-1/2 FTGXM WROT DWV ADAPTER * 2 X 2 X 1-1/2 WROT TEE *
2 FTGXM WROT DWV ADAPTER * 2-1/2 CXCXC WROT TEE *
1-1/2 CXM WROT DWV ADAPTER * 2-1/2 X 1/2 X 2-1/2 WROT TEE *
1-1/2 X 1-1/4 CXM DWV WROT ADA * 2-1/2 X 3/4 X 1-1/2 WROT TEE *
1-1/2 X 2 CXM WROT DWV ADAPTER * 2-1/2 X 3/4 X 2-1/2 WROT TEE *
2 CXM WROT DWV ADAPTER * 2-1/2 X 1 X 1-1/4 WROT TEE *
2 X 1-1/2 CXM WROT DWV ADAPTER * 2-1/2 X 1 X 1-1/2 WROT TEE *
3 CXM WROT DWV ADAPTER * 2-1/2 X 1 X 2 WROT TEE *
4 CXM WROT DWV ADPTER * 2-1/2 X 1 X 2-1/2 WROT TEE *
1-1/4 CXM DWV FL TRAP ADAPTER * 2-1/2 X 1-1/4 X 1-1/4CXCXC TEE *
1-1/2 CXM DWV FL TRAP ADAPTER * 2-1/2 X 1-1/4 X 1-1/2 WROT TEE *
2 CXM DWV FL TRAP ADAPTER * 2-1/2 X 1-1/4 X 2 WROT TEE *
1-1/2 CXMALE DWV SCULLY BUSHIN * 2-1/2 X 1-1/4 X 2-1/2 WROT TEE *
2 CXMALE DWV SCULLY BUSHING * 2-1/2 X 1-1/2 X 1 WROT TEE *
2 C X MJ WROT DWV ADAPTER * 2-1/2 X 1-1/2 X 1-1/4 WROT TEE *
1-1/4 WROT DWV CXFTG 45 ELBOW * 2-1/2 X 1-1/2 X 1-1/2 WROT TEE *
1-1/2 FTGXC WROT DWV 45 ELBOW * 2-1/2 X 1-1/2 X 2 WROT TEE *
2 FTGXC WROT DWV 45 ELBOW * 2-1/2 X 1-1/2 X 2-1/2 WROT TEE *
3 C X FTG WROT DWV 45 ELBOW * 2-1/2 X 2 X 1/2 WROT TEE *
1-1/4 CXC 45 WROT DWV ELBOW * 2-1/2 X 2 X 3/4 WROT TEE *
1-1/2 CXC 45 WROT DWV ELBOW * 2-1/2 X 2 X 1 WROT TEE *
2 CXC 45 WROT DWV ELBOW * 2-1/2 X 2 X 1-1/4 WROT TEE *
3 CXC 45 WROT DWV ELBOW * 2-1/2 X 2 X 1-1/2 WROT TEE *
1-1/4 CXC 90 WROT DWV ELBOW * 2-1/2 X 2 X 2 WROT TEE *
1-1/4 FITXC 90 WROT DWV ELBOW * 2-1/2 X 2 X 2-1/2 WROT TEE *
1-1/2 FITXC 90 WROT DWV ELBOW * 2-1/2 X 2-1/2 X 1/2 WROT TEE *
2 FITXC 90 WROT DWV ELBOW * 2-1/2 X 2-1/2 X 3/4 WROT TEE *
1-1/2 CXC 90 WROT DWV ELBOW * 2-1/2 X 2-1/2 X 1 WROT TEE *
2 CXC 90 WROT DWV ELBOW * 2-1/2 X 2-1/2 X 1-1/4 WROT TEE *
3 CXC 90 WROT DWV ELBOW * 2-1/2 X 2-1/2 X 1-1/2 WROT TEE *
1-1/2 CXC 90 LT WROT DWV ELBOW * 2-1/2 X 2-1/2 X 2 WROT TEE *
2 CXC 90 LT WROT DWV ELBOW * 3 CXCXC WROT TEE *
1-1/4 WROT TUBE END CLEANOUTS * 3 X 3/4 X 3 WROT TEE *
1-1/2 WROT TUBE END CLEANOUTS * 3 X 1 X 3 WROT TEE *
2 WROT TUBE END CLEANOUTS * 3 X 1-1/4 X 3 WROT TEE *
3 WROT TUBE END CLEANOUTS * 3 X 1-1/2 X 1-1/4 WROT TEE *
1-1/4 FLUSH FTG CLEANOUT * 3 X 1-1/2 X 1-1/2 WROT TEE *
1-1/2 FTG CLEANOUT-FLUSH TYPE * 3 X 1-1/2 X 2-1/2 WROT TEE *
1-1/2 X 1 FTG CLEANOUT - FLUSH * 3 X 1-1/2 X 3 WROT TEE *
2 FTG CLEANOUT-FLUSH TYPE * 3 X 2 X 1/2 CXCXC WROT TEE *
1-1/4 FTG CLEANOUT FULL PLUG * 3 X 2 X 1 WROT TEE *
1-1/2 FTG CLEANOUT FULL PLUG * 3 X 2 X 1-1/4 WROT TEE *
2 FTG CLEANOUT FULL PLUG * 3 X 2 X 1-1/2 WROT TEE *
1-1/4 FE X SJ WROT DWV ADAPTER * 3 X 2 X 2 WROT TEE *
1-1/2 FE X SJ WROT DWV ADAPTER * 3 X 2 X 2-1/2 WROT TEE *
1-1/2 X1-1/4 FE X SJ DWV ADAPT * 3 X 2 X 3 WROT TEE *
1-1/4 FTG X SJ WROT ADAPTER * 3 X 2-1/2 X 3/4 WROT TEE *
1-1/2 FTG X SJ WROT ADAPTER * 3 X 2-1/2 X 1 WROT TEE *
1-1/2 X 1-1/4 FTG X SJ ADAPTER * 3 X 2-1/2 X 1-1/4 WROT TEE *
1-1/4 M X SJ DWV ADAPTER * 3 X 2-1/2 X 1-1/2 WROT TEE *
1-1/2 M X SJ DWV WROT ADAPTER * 3 X 2-1/2 X 2 WROT TEE *
1-1/2 X 1-1/4 M X SJ DWV ADAPT * 3 X 2-1/2 X 2-1/2 WROT TEE *
1-1/4 C X SJ WROT ADAPTER * 3 X 2-1/2 X 3 WROT TEE *
1-1/4 X 1-1/2 CXSJ WROT CPLG * 3 X 3 X 1/2 WROT TEE *
1-1/2 C X SJ WROT ADAPTER * 3 X 3 X 3/4 WROT TEE *
1-1/2 X 1-1/4 CXSJ WROT ADAPTE * 3 X 3 X 1 WROT TEE *
2 C X SJ WROT ADAPTER * 3 X 3 X 1-1/4 WROT TEE *
1/8 CXC WROT PRESS COUPLINGS * 3 X 3 X 1-1/2 WROT TEE *
1/4 CXC WROT PRESS COUPLINGS * 3 X 3 X 2 WROT TEE *
1/4 X 1/8 CXC WROT COUPLING * 3 X 3 X 2-1/2 WROT TEE *
3/8 CXC WROT PRESS COUPLING * 4 CXCXC WROT TEE *
3/8 X 1/4 CXC WROT COUPLING * 4 X 1-1/2 X 3 WROT TEE *
1/2 CXC WROT COUPLING * 4 X 2 X 2 WROT TEE *
1/2 X 1/8 CXC WROT COUPLING * 4 X 2 X 3 WROT TEE *
1/2 X 1/4 CXC WROT COUPLING * 4 X 2-1/2 X 2-1/2 WROT TEE *
1/2 X 3/8 CXC WROT COUPLING * 4 X 2-1/2 X 3 WROT TEE *
5/8 CXC WROT COUPLING * 4 X 3 X 2 WROT TEE *
5/8 X 1/4 CXC WROT COUPLING * 4 X 3 X 2-1/2 WROT TEE *
5/8 X 3/8 CXC WROT CPLGS * 4 X 3 X 3 WROT TEE *
5/8 X 1/2 CXC WROT COUPLING * 4 X 4 X 1/2 WROT TEE *
3/4 CXC WROT COUPLING * 4 X 4 X 3/4 WROT TEE *
3/4 X 1/4 CXC WROT COUPLING * 4 X 4 X 1 WROT TEE *
3/4 X 3/8 CXC WROT COUPLING * 4 X 4 X 1-1/4 WROT TEE *
3/4 X 1/2 CXC WROT COUPLING * 4 X 4 X 1-1/2 WROT TEE *
3/4 X 5/8 CXC WROT COUPLING * 4 X 4 X 2 WROT TEE *
1 CXC WROT COUPLING * 4 X 4 X 2-1/2 WROT TEE *
1 X 3/8 CXC WROT COUPLINGS * 4 X 4 X 3 WROT TEE *
1 X 1/2 CXC WROT COUPLING * 5 X 5 X 2 CXCXC WROT TEE *
Investigation Information

The dates of the investigative proceedings and findings concerning this case are:

Action Date
Initiation of Investigation October 27, 2017
Preliminary Determination January 25, 2018
Final Determinations April 25, 2018
Canadian International Trade Tribunal Finding May 25, 2018
Tariff Classification Numbers

The subject goods are usually classified under the following tariff classification numbers:

  • 7412.10.00.11
  • 7412.10.00.19
  • 7412.10.00.90
  • 7412.20.00.11
  • 7412.20.00.12
  • 7412.20.00.19
  • 7412.20.00.90

Please note that these tariff classification numbers may apply to goods which are not subject to SIMA measures, may change because of amendments to the Departmental Consolidation of the Customs Tariff, or the subject goods may be imported under tariff classification numbers that are not listed.

Refer to the product definition for the authoritative details regarding the subject goods. For more information on the tariff classification numbers, please refer to the CBSA's Harmonized System Compliance Web site.

Duty Liability
(Anti-dumping duties)

Country of Origin or Export: Vietnam

Effective on imports of subject goods released by the CBSA on or after May 26, 2018:

Information regarding the normal values of subject goods should be obtained from the exporter. For a list of exporters who currently have normal values, please consult the CBSA's Notice of Final Determination.

For importations of subject goods for which the exporter has not been issued a specific rate, the rates of anti dumping duty are equal to:

Country of Origin or Export Anti-dumping Duty Rate for Future Shipments
(% Advance on Export Price)
Vietnam 159%
Duty Liability
(Countervailing duties)

Country of Origin or Export: Vietnam

Effective on imports of subject goods released by the CBSA on or after May 25, 2018:

For a list of exporters who currently have a specific amount of subsidy, please consult the CBSA's Notice of Final Determination.

For importations of subject goods for which the exporter has not been issued a specific rate, the rates of countervailing duty are equal to:

Country of Origin or Export Countervailing Duty Rate for Future Shipments
(Amount of Subsidy per Kilogram)
Vietnam 76,360.47 VND
Disclosure of Normal Values and Estimated Amounts of Subsidy

The liability for provisional anti-dumping duty results from the proceeding conducted under SIMA. For more information, please consult Memorandum D14-1-7, Assessment and Payment of Duties Under the Special Import Measures Act.

For information on duty assessment, refer to the Guide for self-assessing SIMA duties.

Information Required on Customs Documents

The import documentation should include the information listed below. Failure to provide this information may result in the application of penalties to the importer, pursuant to the Administrative Monetary Penalty System (AMPS).

The import documentation should clearly indicate the following:

  • Confirmation whether the product is subject to duties
  • Name and address of producer/manufacturer
  • Location of plant/mill of production
  • Place from which direct shipment to Canada began
  • Name and address of vendor (if different from the producer)
  • Country of origin
  • Country of export
  • Canadian customer’s name and address
  • Canadian importer’s name and address (if different from the customer)
  • Full product description of the goods, including:
    • Product Number: Indicate the equivalent subject product name assigned by the CBSA, exactly as appears in the list of subject goods, if applicable. Refer to the list of subject goods.
    • Product Type: Indicate model name in terms of one of the following: Adapter (Male, Female, Other), Bushing, Coupling, Elbow, Flange, Pressure Tee, Union (DWV TY, DWV Y, Cap and Cleanout, Crosses).
    • Additional Info for Type: Where applicable, provide additional product description for each product. For example, identify female adapters that are female street, female drop ear and female hi ear.
    • Configuration/Connection: Indicate each configuration or connection (e.g., C, M, FE, FTG identified in Abbreviation Chart). For example, a female street adapter has a connection consisting of FTG X FE.
    • Nominal Size: Indicate the nominal size(s) of the fitting. The nominal size of each connection is to be shown in “inches”. If the size of the fitting is identified in “metric” but not made specifically to metric dimensions, indicate the equivalent measurement in inches.
    • Application: Indicate WP for Wrought Pressure; WD for Wrought Drainage; CP for Cast Pressure; CD for Cast Drainage.
    • Additional Information for Application: Indicate “PH” if this product was sold for a plumbing and heating application. Indicate “ACR” if this product was sold for an air-conditioning and refrigeration application. Indicate “ALL” if you are not aware of the application
    • Lead Content: Indicate the percentage of lead.
    • Equivalent Dimensions: Indicate the equivalent dimensions of the fitting, if applicable, for ACR and non-ACR uses. For example, a 1/2" 90º elbow is designated as such when used in PH, and in ACR it is called a 5/8" 90º elbow. The dimensions are to be shown in “inches”. If the size of the fitting is identified in “metric” but not made specifically to metric dimensions, indicate the equivalent measurement in inches.
    • Other Relevant Characteristics
  • Date of sale, date of shipment
  • Quantity (state unit of measure, e.g. kilograms, metric tonnes, etc.)
  • Unit selling price and total selling price to importer in Canada
  • Currency of settlement used (e.g. US$, CDN$, etc.)
  • Terms and conditions of sale (e.g. FOB, CIF, etc.)
  • All costs, expenses, and charges incurred by the exporter and vendor in the shipment of the subject goods to Canada (includes inland and ocean freight, insurance, duties, port and handling charges, etc.) and,
  • The amount of any export taxes applicable to the goods.
Appeal Decisions Relating to Subjectivity

Summaries of appeal decisions made by the CBSA respecting whether an imported good is subject to this measure in force can be found on the SIMA Appeals page.

Email for Duty Assessment Questions

Trade_Programs-Programmes_commerciaux@cbsa-asfc.gc.ca

CBSA Reference Number(s)
  • CPF2 2017 IN
CITT Reference Number(s)
  • PI-2017-003
  • NQ-2017-004
Date modified: