Language selection

Search


Carbon steel welded pipe 3: Measures in force

Dumping (Pakistan, Philippines, Türkiye, Vietnam)

Measure in force code (MIF code)

CSWP3

Product information

Product definition

Carbon steel welded pipe, commonly identified as standard pipe, in the nominal size range from ½ inch up to and including 6 inches (12.7 mm to 168.3 mm in outside diameter) inclusive, in various forms and finishes, usually supplied to meet ASTM A53, ASTM A135, ASTM A252, ASTM A589, ASTM A795, ASTM F1083 or Commercial Quality, or AWWA C200-97 or equivalent specifications, including water well casing, piling pipe, sprinkler pipe and fencing pipe, but excluding oil and gas line pipe made to API specifications exclusively, originating in or exported from the Islamic Republic of Pakistan, the Republic of the Philippines, the Republic of Turkey (excluding those goods exported by Erbosan Erciyas Boru Sanayii ve Ticaret A.S.) and the Socialist Republic of Vietnam.

Investigation information

The dates of the proceedings concerning this case are:

Action Date
Initiation of Investigation July 20, 2018
Preliminary Determination October 18, 2018
Final Determination January 16, 2019
Canadian International Trade Tribunal’s Finding February 15, 2019
Normal value review: SeAH Steel Vina Corporation
Normal value review: Borusan Mannesmann Boru Sanayi ve Ticaret A.S.
Normal value review: Cayirova Boru ve Sanayi Ticaret A.S.
Normal value review: International Industries Limited
Expiry review determination
Canadian International Trade Tribunal's Order

Tariff classification numbers

Beginning January 1, 2022, under the revised customs tariff schedule, subject goods are normally classified under the following tariff classification numbers:

  • 7306.30.00.42
  • 7306.30.00.43
  • 7306.30.00.44
  • 7306.30.00.45
  • 7306.30.00.46
  • 7306.30.00.47
  • 7306.30.00.49
  • 7306.30.00.52
  • 7306.30.00.53
  • 7306.30.00.54
  • 7306.30.00.55
  • 7306.30.00.56
  • 7306.30.00.57
  • 7306.30.00.59
  • 7306.30.00.62
  • 7306.30.00.63
  • 7306.30.00.64
  • 7306.30.00.65
  • 7306.30.00.66
  • 7306.30.00.67
  • 7306.30.00.69

Please note that these tariff classification numbers may apply to goods which are not subject to the Special Import Measures Act (SIMA) measures, may change because of amendments to the Departmental Consolidation of the Customs Tariff, or the subject goods may be imported under tariff classification numbers that are not listed.

Refer to the product definition for the authoritative details regarding the subject goods. For more information on the tariff classification numbers, please refer to the harmonized commodity description and coding system.

Duty liability (Anti-dumping duties)

Country of origin or export: Pakistan, the Philippines, Türkiye, Vietnam

The following table identifies the exporters who currently have been issued normal values. Please refer to the Normal value model ID table for information relating to model IDs, model descriptions and units of measure. Information regarding the normal values of subject goods should be obtained from the exporter. Please note that model information is posted only for exporters who have successfully enrolled in an Exporter ID.

Country Exporter Exporter ID Cooperative since Last revised
Pakistan International Industries Limited 760343400RM0001
The Philippines HLD Clark Steel Pipe Co., Inc. 783934706RM0001
Türkiye Borusan Mannesmann Boru Sanayi ve Ticaret A.S. 726470008RM0001
Cayirova Boru ve Sanayi Ticaret A.S. SIMAEXP00000009
Vietnam Hoa Phat Steel Pipe Co., Ltd. 778761403RM0001
SeAH Steel Vina Corporation 787081405RM0001

Pursuant to paragraph 41(1)(a) of the Special Import Measures Act, the Canada Border Services Agency terminated the dumping investigation in respect of certain carbon steel welded pipe exported to Canada by:

Country Exporter Exporter ID
Türkiye Erbosan Erciyas Boru Sanayii ve Ticaret A.S. 777382706RM0001

For importations of subject goods originating in/or exported from Pakistan, the Philippines, Türkiye for which the dumping investigation has not been terminated, and Vietnam, for which the exporter has not been issued normal values, the anti-dumping duty is listed in the table below:

Country of origin or export Margin of dumping rate for all other exporters1
Pakistan 66.8%
The Philippines 66.8%
Türkiye 45.8%
Vietnam 54.2%

1Expressed as a percentage of export price

Disclosure of normal values

The liability for anti-dumping duties results from the proceedings conducted under SIMA and from the findings of the Canadian International Trade Tribunal (CITT). Information regarding the normal value of the subject goods in question and the amount of anti-dumping duty payable should be obtained from the exporter. Related information may be made available to importers on a need-to-know basis in accordance with the provisions of Memorandum D14-1-2: Disclosure of Normal Values, Export Prices, and Amounts of Subsidy Established Under the Special Import Measures Act

General information for CBSA assessment and revenue management (CARM)

CARM is the official system of record for the assessment and collection of duties and taxes on imported commercial goods. In most circumstances, the CARM system will automatically calculate the amount of SIMA duties payable based on information provided; however, it is still your responsibility to verify that the amounts assessed are correct and, if necessary, self-declare correct amounts. For additional information relating to CARM and self-assessing SIMA duties, please refer to the Guide for self-assessing Special Import Measures Act duties and applicable D-Memorandums.

Requests for re-determination information for CARM

Requests for re-determination relating to SIMA duties must be filed by the importer or the importer’s agent via the CARM Client Portal (CCP), through the Statements of adjustment and appeals. Failure to submit correctly may result in rejection and/or delayed processing.

Summary decisions made by the CBSA respecting whether an imported good is subject to this measure in force can be found on President-level re-determinations.

Information required on customs documents

The import documentation should include the information listed below. Failure to provide this information may result in the application of penalties to the importer, pursuant to the Administrative Monetary Penalty System (AMPS).

The import documentation should clearly indicate the following:

  • Confirmation whether the product is subject to SIMA duties
  • Exporter ID
  • Name and address of producer/manufacturer
  • Location of plant/mill of production
  • Place from which direct shipment to Canada began
  • Name and address of vendor (if different from the producer)
  • Country of origin
  • Country of export
  • Canadian customer's name and address
  • Canadian importer's name and address (if different from the customer)
  • Full product description of the goods, including:
    • Model ID
    • Model description
    • Specification and grade
    • Nominal pipe size (NPS)
    • Outside diameter
    • Wall thickness
    • Pipe finish
    • End finish

Other relevant characteristics:

  • Date of sale, date of shipment
  • Quantity (state unit of measure, e.g. kilograms, pounds, metric tonnes, etc.)
  • Unit selling price and total selling price to importer in Canada
  • Currency of settlement used (e.g. US$, CDN$, etc.)
  • Terms and conditions of sale (e.g. FOB, CIF, etc.)
  • All costs, expenses, and charges incurred by the exporter and vendor in the shipment of the subject goods to Canada (includes inland and ocean freight, insurance, duties, port and handling charges, etc.) and
  • The amount of any export taxes applicable to the goods

Appeal decisions relating to subjectivity

Summaries of appeal decisions made by the CBSA respecting whether an imported good is subject to this measure in force can be found on the SIMA Appeals page.

Email for duty assessment questions

Trade_Programs-Programmes_commerciaux@cbsa-asfc.gc.ca

CITT reference number(s)

  • PI-2018-004
  • NQ-2018-003
  • RR-2023-007

Page details

Date modified: