Chapter 75 - T2020
Nickel and articles thereof
Tools
PDF (446 KB) [help with PDF files]
Notes.
1. In this Chapter the following expressions have the meanings hereby assigned to them:
(a) Bars and rods
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
(b) Profiles
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
(c) Wire
Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width.
(d) Plates, sheets, strip and foil
Flat-surfaced products (other than the unwrought products of heading 75.02), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including "modified rectangles" of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:
- of rectangular (including square) shape with a thickness not exceeding one-tenth of the width,
- of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.
Heading 75.06 applies, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.
(e) Tubes and pipes
Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular, or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.
Subheading Notes.
1. In this Chapter the following expressions have the meanings hereby assigned to them:
(a) Nickel, not alloyed
Metal containing by weight at least 99% of nickel plus cobalt, provided that:
- (i) the cobalt content by weight does not exceed 1.5%, and
- (ii) the content by weight of any other element does not exceed the limit specified in the following table:
Element | Limiting content % by weight |
---|---|
Fe - Iron | 0.5 |
O - Oxygen | 0.4 |
Other elements, each | 0.3 |
(b) Nickel alloys
Metallic substances in which nickel predominates by weight over each of the other elements provided that:
- (i) the content by weight of cobalt exceeds 1.5%,
- (ii) the content by weight of at least one of the other elements is greater than the limit specified in the foregoing table; or
- (iii) the total content by weight of elements other than nickel plus cobalt exceeds 1%.
2. Notwithstanding the provisions of Chapter Note 1 (c), for the purposes of subheading 7508.10 the term "wire" applies only to products, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm.
Supplementary Note.
1. In this Chapter the expression "unworked", when referring to foil, means products which have not been processed beyond the condition as from the rolling mill (for example, not machined, cut to shape, perforated or coated).
Statistical Note.
(NB This note does not form part of the Customs Tariff legislation.)
1. For the statistical purposes of subheading 7501.10, the unit of measure (kilogram) refers to the nickel content of the matte and shall be the assay quantity without deductions.
Customs Tariff Schedule
Tariff Item | SS | Description of Goods | Unit of Meas. | MFN Tariff | Applicable Preferential Tariffs |
---|---|---|---|---|---|
Tariff Item | SS | Description of Goods | Unit of Meas. | MFN Tariff | Applicable Preferential Tariffs |
75.01 | Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy. | ||||
7501.10.00 | 00 | Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy. - Nickel mattes | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
7501.20.00 | 00 | Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy. - Nickel oxide sinters and other intermediate products of nickel metallurgy | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
75.02 | Unwrought nickel. | ||||
7502.10.00 | 00 | Unwrought nickel. - Nickel, not alloyed | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
7502.20.00 | 00 | Unwrought nickel. - Nickel alloys | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
7503.00.00 | 00 | Nickel waste and scrap. | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
7504.00.00 | Nickel powders and flakes. | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free | |
7504.00.00 | 10 | Nickel powders and flakes. - Powders, containing by weight 60% or more of nickel: - Powders | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
7504.00.00 | 90 | Nickel powders and flakes. - Other | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
75.05 | Nickel bars, rods, profiles and wire. | ||||
7505.11.00 | 00 | Nickel bars, rods, profiles and wire. - Bars, rods and profiles: - Of nickel, not alloyed | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
7505.12.00 | 00 | Nickel bars, rods, profiles and wire. - Bars, rods and profiles: - Of nickel alloys | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
7505.21.00 | 00 | Nickel bars, rods, profiles and wire. - Wire: - Of nickel, not alloyed | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
7505.22.00 | 00 | Nickel bars, rods, profiles and wire. - Wire: - Of nickel alloys | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
75.06 | Nickel plates, sheets, strip and foil. | ||||
7506.10 | Nickel plates, sheets, strip and foil. - Of nickel, not alloyed | ||||
7506.10.10 | 00 | Nickel plates, sheets, strip and foil. - Of nickel, not alloyed - Worked foil of a thickness not exceeding 0.15 mm | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
7506.10.90 | 00 | Nickel plates, sheets, strip and foil. - Of nickel, not alloyed - Other | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
7506.20 | Nickel plates, sheets, strip and foil. - Of nickel alloys | ||||
7506.20.10 | 00 | Nickel plates, sheets, strip and foil. - Of nickel alloys - The following foil of a thickness not exceeding 0.15 mm:Unworked, containing by weight less than 60% of nickel;Worked | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
7506.20.90 | 00 | Nickel plates, sheets, strip and foil. - Of nickel alloys - Other | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
75.07 | Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves). | ||||
7507.11.00 | 00 | Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves). - Tubes and pipes: - Of nickel, not alloyed | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
7507.12.00 | 00 | Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves). - Tubes and pipes: - Of nickel alloys | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
7507.20.00 | 00 | Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves). - Tube or pipe fittings | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
75.08 | Other articles of nickel. | ||||
7508.10.00 | 00 | Other articles of nickel. - Cloth, grill and netting, of nickel wire | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
7508.90 | Other articles of nickel. - Other | ||||
7508.90.10 | 00 | Other articles of nickel. - Other - Anodes for electroplating | KGM | Free | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
7508.90.90 | 00 | Other articles of nickel. - Other - Other | KGM | 3% | CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free |
- Date modified: